TecTake 402409 Anwendungsleitfaden

EN DE FR ES IT
INSTRUCTION GUIDE/GEBRAUCHSANLEITUNG/NOTICE D'UTILISATION/MANUAL
EN
The LED Candles made of real wax, with a remote control & timer. These are battery-operated candles designed
to illuminate and accent any room of your home or provide lighting during evening parties outdoors. Each candle
operates on 3 x 1.5V AAA Batteries and because they do not have a real flame, they
are safe to use almost anywhere, even near fabric and curtains.
Please note: Do not leave in hot sunlight, use outdoors if it is raining or keep outside permanently (They are NOT
completely weatherproof).
Battery Instructions:
Open the compartment on the bottom of each candle.
Insert 3 x AAA 1.5V batteries into each candle.
Do not mix different battery types.
If candles do not operate, check battery polarity or replace old batteries with new.
Replace the compartment covers and press the small switch to the "on" position.
The Remote uses battery: 1 x CR2025 (included). To replace it slide open the battery compartment on the
remote control taking note of the battery's polarity and replace it with a new battery.
Alkaline Batteries will give the best performance and last longer.
Do not use with rechargeable batteries.
Please ensure that you use new batteries of the same brand and type. If one of the candles is not changing
colours as it should then please change the batteries in the first instance.
Using the Remote Control:
Each candle can only be individually controlled using the remote control if they are not placed in a cluster. Simply
point the remote control at the candle and choose your settings (please note that the remote control has a wide
range and therefore may control other candles when pointed at a single candle).
Warnings & Cautions
Do not expose the candles to heavy rain or excessive moisture
Do not store or expose the candles in/to temperatures above 20°C
TecTake GmbH
Tauberweg 41, D-97999 lgersheim, Germany
DE INSTRUCCIONESMANUALE DI ISTRUZIONI
Remote Controlled Colour Changing LED Candles
Instruction Manual
The remote control functions are explained below:
To turn on your Candle move the On/Off Switch on the base of the Candle to the
"On" position
Mode –The candles have 2 light modes; Flickering and Steady. Press this button
to choose your desired light mode.
Timer-Press this button to set the timer. The timer has 2 modes 4hrs or 8hrs. Once
the timer has been set the candles will automatically switch off after the set time
period has elapsed.
Multi Colour –Press this button to set the candles to switch colours automatically.
If the button is pressed once more whilst in this mode the candle will stay lit in the
colour that they are in.
Colour keys– Choose your candle colour from one of the 12 colour keys
Colour Buttons –You can set the candles to stay at one colour by choosing the colour
from the 12 colour buttons on the remote control. Please note that the actual colours
that the candles light up as will be slightly different to the printed colours on the remote
control unit.
1
402409