System Connection - Digiquest Ricd1197 Bedienungsanleitung

SYSTEM CONNECTION

WARNING: When making connections ALL the devices must be
disconnected from the electrical socket. Only after all connections are
complete, plug the TV into an electrical outlet,
adapter into an electrical outlet and its jack into the port 12V DC IN of the
decoder. The connection to the TV can be done either via HDMI or via
SCART. WARNING. By connecting the decoder with HDMI it is necessary
to select the source (eg. HDMI1) on the input used: press the SOURCE
button on the TV (it can also be identified with INPUT, AV, AUX, ZERO etc.
depending on the brand remote control) otherwise no picture appears.
Connecting HDMI
Connecting SCART
For TVs without HDMI you can connect the decoder using SCART.
Antenna
WARNING: the cables required for the various connections described are not
included in the package.
the plug of the 12V power
3 1
English