Extreme Line EXREMOTE Kurzbedienungsanleitung

brief instruction
LED teach-in
1. LED device turned electrical power turn off
2. press channel button and
3. red LED flashes
4. turn LED device electrical power turn on
LED flashing stops,
radio remote control ready.
HEATING teach-in
1. heating device turned appliance switch off
2. press channel button and
3. red LED flashes
4. turn heating device appliance switch on
LED flashing stops,
radio remote control ready.
application
1. choose channel
2. choose function for
light or heating
Attention! The remote changes over to stand-by
after a little while, to save battery.
The wake up works with the channel button. Be
sure to additionally use the main operating instruc-
tions of your device. Do not cover the remote con-
trol or place it with the operating side on an area.
Otherwise it is possible that it starts unwanted.
simultaneously >3 sec.
simultaneously >3 sec.
channel 1
channel 2
light
dim
heating
red LED
EN