clarsen M765 Gebrauchsanweisung

USB Dehumidifier
Item codes: M765/ 624670
Instructions for Use
Please read and retain these instructions for future
reference
Power Details: Voltage details: 110- 220V
Frequency details: 50Hz
Wattage details: 25W
Size: 5.8 x 2 x 16.8cm
Accessories: USB Cable
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new USB Dehumidifier.
User Instructions here
1. For the first time, please charge for about 3-4 hours to ensure the USB Dehumidifier lifespan is
optimised.
2. After charging, remove USB cable and ensure the product is upright in the stand supplied.
3. When the colour indicator is purple, it indicates that the product can fully absorb moisture. You can
place the product into the place you need to keep dry.
4. If the colour indicator is red, it indicates that the product has fully absorbed enough moisture which
needs to be removed.
5. To remove moisture insert the USB cable and charge until the indicator shows purple, then re-use.
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
•
READ ALL INSTRUCTIONS BEFORE USE.
•
FOR DOMESTIC INDOOR USE ONLY.
•
DO NOT USE OUTDOORS OR FOR COMMERCIAL USE.
•
ONLY USE WITH THE USB CABLE SUPPLIED.
•
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE
CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE.
•
BEFORE CONNECTING THE APPLIANCE, CHECK IF THE VOLTAGE INDICATED ON THE BOTTOM OF THE
APPLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR HOME.
•
CHECK THE APPLIANCE AND POWER CABLE CAREFULLY FOR DAMAGE BEFORE EACH USE.
v001: 17/04/24
ENGLISH INSTRUCTIONS
CAUTION! THIS ELECTRICAL APPLIANCE'S EXTERNAL SURFACES
WILL GET HOT IN NORMAL USE.
ALLOW TO COOL BEFORE TOUCHING THE EXTERNAL SURFACES.