Function Description - Nexigo 1526S Wht Benutzerhandbuch

3

Function Description:

1. Cooling fan: Twin high-speed fans enhance the
cooling system of the PS5 to gently pull additional
air through the console.
2. Fan speed switch: Used to adjust fan speed,
switch between the different speeds quickly and
easily. As you switch between the different fan
speeds the fan lights will also brighten indicating
the current speed.
3. Battery charging indicator: Each charging dock
has a battery charging indicator that will show the
current controller charging status. While the
controller is charging, the battery icon indicator will
light up dynamically from bottom to top showing
the controller is charging. When the controller is
fully charged, the battery indicator will be fully lit
and will no longer show charging status.
4. LED strip light: Press the light mode switch to
change the light mode among colorful flowing light
mode, colorful breathing light mode, and steady
blue light mode. When the unit is powered on and
there is no controller on the charging bays, the LED
strip lights will display a colorful flowing light pattern
by default. While the controller is charging, the LED
strip lights will display an orange breathing light to
indicate the controller is charging and will turn to a
steady blue light after two charging controllers are
fully charged.
Note: To maximize the lifespan of the PS5 controllers
please do not remove the controllers while they are
being charged. When the battery level of the
controller reaches 80% or above, if you disconnect
the controller from the charger and attempt to
reconnect it again it will not be able to continue
charging due to the battery protection features of
the PS5 controller. The controller will continue to
charge only after the battery level falls below 80%.
EN - 03