Installation; Electrical Connection; Equipotential; Instructions For Use - Lotus Cookers Ri-1Em Anleitung Für Installation Und Gebrauch

IE
GB
IT CH

INSTALLATION

The installation, start-up and maintenance of this appliance must be carried out only by qualified fitters. All
installation operations must be in accordance with current regulations. The manufacturer declines all responsibility
for malfunctioning due to bad or faulty installation.
Attention: international regulations require that a omnipole cut-out device with contact opening of at least 3 mm be
fitted on the wiring leading to the appliance.

ELECTRICAL CONNECTION

The appliance is supplied complete with electrical wiring. If this needs to be replaced, disconnect from the terminal
board situated on the back panel. The electrical wiring must be no less than HO5 RN F and have a section suitable
for the appliance (see 1.1). Secure the wiring with the wiring clips. Connect the wire ends to their terminals on the
terminal board. The earthing wire must be longer than the other wires so that it will disconnect after the live wires in
the event of the fastener breaking.
.
RI-1EM RI-62EM

EQUIPOTENTIAL

The appliance is designed to be connected to a unipotential system. The connecting screw is situated on the back of
the appliance and is identified by an adhesive label.
Attention: the manufacturer cannot be held responsible for, and does not cover in the guarantee any damage
resulting from bad or faulty connections.

INSTRUCTIONS FOR USE

IGNITION

Switch on at the mains, switch on the appliance (A).
RI-1EM RI-62EM
21