Ketterer Remote Control Bedienungsanleitung Seite 5

2. Commissioning
2.1 Activate receiver for pairing
Receiver and hand switch must be teached.
To do so press the black button with the help of a suitable object
(e.g. toothpick) for approx. 2 seconds.
The LED lights up red as long as the button is pressed.
2.2 Pair the hand switch with the receiver
Press the button with the up arrow on the hand switch for 3
seconds. (Please keep a distance between the hand switch and
the receiver of approx. 1 m)
The red LED on the receiver flashes approx. 3 times.
The radio remote control can now be used.
Note:
If the blue LED on the hand control does not light up when a
button is pressed, please change the battery.
3. Usage
3.1 Move the system
Press up or down button to move the system up- or downwards.
Note:
For use, receiver and hand switch need to be in a greater distance
(at least 2m) from each other, to avoid interference.
Dokumentennummer/Pfad
ELO/Begleitende Dokumente/3143/3143.71-13
Zuletzt geändert/Name Freigegeben/Name
Costa_C Börstler
Datum Änd.-Ind.
07.06.2021 D
Seite
5 von 6