eichhorn Ladybug Rider Bedienungsanleitung Seite 6

Convert the unit to be a seating rider.
Remove the plastic lid from the foot-board. Mount it at the seat post for storage.
Connect the seat with the seat post and insert the seat post and fasten it with the knot.
Please make sure it is securely tightened before in use.
Adjust it to the desired height of seat and fastened it with screws securely.
The handle bar can be adjustable in two-section.
Your Ladybug Rider is now ready to use as a seating rider.
The Ladybug Rider is ready to
serve you.
Ladybug Rider is equipped with a
adjustable strap that helps to
storage the unit when not in use.
Attach the strap onto the handle bar
and hook the unit at the bottom
firmly as illustrated. Attention:
Storage strap may not be suitable
for some baby buggies. Please
consult with the vendor for
information.