Matco Tools PFEDBB25 Bedienungs- Und Wartungsanleitung Seite 9

NOTE
Built-in pressure relief valve (8) is
designed to open and maintain
maximum pressure between
20 and 25 psi (1.4 and 1.7 bar).
Fluid will continue to flow as long as
pressure remains in reservoir and shut-
off valve is open.
WARNING

Do not exceed 25 psi (1.7 bar) in
reservoir. Relief valve (8) is designed to
prevent this, but if pressure exceeds
25 psi (1.7 bar), immediately discontinue
use and send unit to an authorized
service center for repair or replacement.
Failure to comply could result in death
or serious injury.
NOTE
Depending on fluid type and future
intended use, remaining fluid may be
stored in reservoir.
NOTE
Fluid may be left in reservoir.
If fluid is not stored in reservoir, clean
using denatured alcohol or common
household cleaner, and store empty.
Do not use petroleum based solvents for
cleaning unit.
5
4
Service parts (internal)
1 2
9
6
7
8
9
10
11
12
Fig. IPB 1
3
Fig. 5