ETT McTrack Lightning Referenzhandbuch Seite 8

Operating the Helicopter with the Remote Control:
First choose a transmitting frequency A, B or C at the remote control. Then switch the helicopter to ON. Finally
switch the remote control to ON.
Consider that this helicopter needs permanent control corrections because it can not fly stabile by itself.
It needs a lot of training to fly it perfectly.
E.T.T. Electronic Toys Trading GmbH Kreuzstraße 65/66 38118 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Ascension: When pushing the throttle lever up the blades
will rotate faster and faster until the helicopter begins to
ascend.
Descent: When pulling the throttle lever down the blades
rotate slower and the helicopter will descending.
Steering: Pressing the throttle lever to the left makes the
helicopter turning left.
Steering: Pressing the throttle lever to the right makes
the helicopter turning right.
Forward: Pushing the rudder level up makes the
helicopter move forward.
Backward: Pulling the rudder level down makes the
helicopter move backward.
Sideways to the right: Pressing the rudder lever to the
right makes the helicopter fly sideways to the right.
Sideways to the left: Pressing the rudder lever to the left
makes the helicopter fly sideways to the left.
950-025