now! RGB Bedienungsanleitung Seite 2

Instructionmanual RGB Remote
General notes:
-This manual contains important information on how to use the remote control switch.
We therefore recommend keeping this manual in a safe place.
Note:
Each remote requires a CR2032 battery
Max distance between remote and receiver is up to 10m
Workingfrequency: 2.4 GHz
Basic functions
Colour wheel for
manual color change
Gradual change
Advanced functions
Adjusting the brightness
Hold down the "Gradual change button" and rotate the colour wheel at the same time.
There are 5 brightness levels.
Speed of color change
Hold down the "Flashing change button" and rotate the colour wheel at the same time.
There are 5 speed levels.
Sleep mode
After a while the remote switches to sleep mode. Push any button to reactivate the remote.
Flashing change
ON/OFF
Start-up / Changing the battery
Start-up:
-Remove the plastic covering of the battery
-Receiver and remote are now communicating.
Battery changing
-Open the battery case and remove the old battery.
-Insert the new battery and close the case. Please mind the polarity!
+
CR2032
Connecting a new remote
-Push the Syncronize button on the top of the receiver, e.g with a pen.
The button starts to flash blue
-Remove the plastic covering of the battery
-Receiver and remote are now communicating.
-The blue light on the receiver goes off.
-Syncronisation is complete.
MA RGB Fernbedienung 15.035.86