Karcher Design EZ180 RCBR 71 Montageanleitung Seite 3

Assembly instruction for flush mounted door handle plate EZ180 RCBR 71
1. Insert the spindle in the lock. Insert
the spindle that the grub screw
pierces into the thinnest part.
4. Mark drilling holes on the door leaf.
2. Centre the excentrical
spindle.
5. Drill holes up to the lock case with a
7 mm bore on the marked positions.
Attention: Do not drill through the
lock case!
.
3. Put enclosed drilling template on the
excentrical spindle. Align spindle
straight line by means of an angle.
Repeat the complete drilling process
(step 1- 5) for the opposite side!
Karcher GmbH
Deutschland
Tel. +49-7264-91640
Fax +49-7264-916440
mail@karcher-design.de
www.karcher-design.de