Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 843062 / 843063 / 843068 / 930657 Sehr geehrter Kunde, vielen Dank das Sie sich für den Kauf unseres Produktes entschieden haben. Es erfüllt die Anforderungen der geltenden europäischen und nationalen Richtlinien. Um den Zustand des Produktes zu erhalten und einen gefahrlosen Betrieb sicherzustellen, müssen Sie als Anwender diese Produkt-Hinweise und Montageanleitung beachten! Sie enthalten wichtige Informationen zur Inbetriebnahme und Handhabung.
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 843062 / 843063 / 843068 / 930657 3. Pflege und Wartung Reparaturen dürfen ausschließlich durch den Elektro-Fachmann ausgeführt werden. Schalten Sie erst das gesamte Produkt spannungsfrei und lassen es abkühlen, bevor Sie Reinigungs- oder Pflegemaßnahmen vornehmen.
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 843062 / 843063 / 843068 / 930657 843063 / RF-Wandschalter Spannungsversorgung: 3V (2x AAA) Schutzklasse: IP20 Sendefrequenz: 2,4 GHz Kanäle: 1-5 Kanäle (S, CCT, RGB, RGBW, RGB-CCT) Zonen: 1 8. Grundsätzliches Um Hitze vom Controller abzuleiten, empfehlen wir beim Einbau ausreichend Platz zu lassen, damit die Luft zirkulieren kann und der Controller nicht überhitzt.
Seite 7
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 843062 / 843063 / 843068 / 930657 Fernbedienung Alle Zonen (1-4) An/Aus RGB-Farbrad zur Auswahl der Indikator-LED zur Funktions- gewünschten Farbe anzeige der Fernbedienung (nur bei RGB, RGBW, RGB-CCT) Slider zum Einstellen der Farbtemperatur-Slider zur Auswahl Gesamthelligkeit der gewünschten Farbtemperatur...
Produkt-Hinweise Bedienungsanleitung Artikel Nr.: 843062 / 843063 / 843068 / 930657 10. Inbetriebnahme in 4 Schritten 1. Installieren Sie den Controller und schließen Sie die Versorgungsspannung (12/24V DC) und das LED-Stripe an 2. Wahlen Sie am Controller durch Drücken der „Switch“ Taste den entsprechend benötigten Kanal-Modus aus (1-5 Kanal) 3.
Seite 9
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 RF controller touch panel, remote control, receiver Deko-Light Elektronik-Vertriebs GmbH 26.11.2021 www.deko-light.com / deko@deko-light.com Technical Data can be changed without advance notice. Errors excepted. 1 / 16...
Seite 10
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 Contents Safety Instructions ..........................page 11 Proper Use ............................page 11 Care ..............................page 12 Faulty Function ............................. page 12 Storage and Disposal ........................... page 12 Purchased parts package ........................page 12 Technical data ............................
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 Dear customer, thank you for deciding to purchase our product. The product fulfils the requirements of effective European and national guidelines. To maintain the condition of the product and to ensure safe operation, you - as the user - must observe the product notes and the operation manual! They contain important information for the start-up and handling.
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 3. Care Repairs may only be carried out by a qualified electrician. Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 843063 / RF-Wall switch Power supply: 3V (2x AAA) IP safety class: IP20 Frequency: 2,4 GHz Channel: 1-5 Channel (S, CCT, RGB, RGBW, RGB-CCT) Zones: 8. Basics To dissipate heat from the controller, we recommend leaving enough space during installation so that the air can circulate and the controller does not overheat.
Seite 15
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 Remote All Zones (1-4) On/Off RGB color wheel to select the Indicator LED for displaying the desired color function of the remote control (only RGB, RGBW, RGB-CCT) Slider for setting the...
Product-Notes Manual Article No.: 843062 / 843063 / 843068 / 930657 10. Commissioning in 4 steps 1. Install the controller and connect the supply voltage (12 / 24V DC) and the LED strip 2. Select the required channel mode on the controller by pressing the „Switch“ button (1-5 channel) 3.