MRA 23.035.R Montageanleitung Seite 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
2 Holding plates
4 Domed screw M5x16
4 Plastic washer
4 Rubber Nut
Fitting the screen to the motorcycle:
1. Stand your motorbike up on a level surface.
2. Undo the fastening screws and remove the original screen (P1).
3. You can attach the mounting plates using the original screws at three
different positions (P2 & P3).
4. Insert the rubber nuts into the holes (P2).
5. Position your MRA racing screen and fasten it to your bike using the oval-
head screws and washers.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
DUCATI Hyperstrada 2013-
Article No..
--- Allen key 3 & 4mm
10991
10554
10635
10629
3
Required tools