dewert okin OKINAP System Kurzanleitung Seite 3

OKINAP System Quick Guide
Reset the pairing list

Press and hold the button (6) while connecting the system to the
power supply.

Blinking twice of the LED signals the successful deleting of the pairing
list.
Reset to factory settings

The system can reset to factory settings. All data in the Sensor Box will
delete (e.g. sleep data).
For reset to factory default, perform the following steps.

Give the button (6) 4x short press in succession. The LED
Now actuate the button (6) one times, the system is reset to factory
settings.

The reset to factory settings is successful if the LED extinguishes.
04.12.2017
Cleaning and care
The system was designed so that it would be easy to clean.

Be sure to unplug the power cord on the power supply before you
begin cleaning it!

Clean the system using a dry antistatic cloth.
Be sure that you do not damage the connecting cables during the cleaning.
Disposal
The system consists of electronic components, cables and metal and
plastic parts. You should observe all corresponding national and regional
environmental regulations when disposing of the system.
The disposal of the product is regulated in Germany by Elektro-G,
lights on
.
internationally by the EU Directive 2011/65/EC (RoHS), or by any
applicable national laws and regulations. (The product is not regulated by
the EU Directive 2012/19/EC (WEEE).)
The system should not be disposed of with
normal household waste!
xxxxx
DewertOkin GmbH
Weststraße 1
32278 Kirchlengern
Phone: +49 (0)5223/979-0
Fax: +49 (0)5223/75182
http://www.dewertokin.de
Info@dewertokin.de
3 / 6