MBNLED RF-CH11 Benutzerhandbuch Seite 10

RF Remote Control / RF Receiver
SPEED
Adjusts the master program speed of the controlled device. The level gauge on the display
only demonstrates the program speed; it does not represent the real level of the lighting
device.
DMX
Switches on and off the DMX mode.
FADE
Switches on and off the FADE function.
LOCK
Switches on and off the LOCK function.
SETTINGS
Configuration of the remote controller and the RF communication
Setup menus:
 RF Channel
 Contrast
 Sound
 Sleep time
 Accu voltage
 About
RF Channel:
Select a channel from 0-61 for the selected device. After modifying this parameter the RF
receiver must be teached with this setting.
SET THE RF CHANNEL OF THE RF RECEIVER
The RF receiver has one button. Press and hold it pressed, until the red and green
LED start blinking together (about 5 sec). Release the button. Now only green led
blinks.
The RF receiver now continuously scans the channels 11, 22, 33 and 44.
Go back to program selection on the remote controller and select one program
several times.
The RF receiver will learn the frequency and is now permanently configured for this
channel.
For products PRO CONTROLLER X1 and X3 only the channels 11, 22, 33, 44 can be
used!
www.mbnled.com
10
MBNLED
info@mbnled.com