RUSTA 623011450101 Handbuch Seite 4

ENG
as soon as possible to avoid it spreading. First remove the cover and clean the area
where surface rust has formed before treating with rust remover. Avoid getting rust
remover on the plastic parts. Then repaint the surface with a suitable paint. Contact
your local paint store for advice on which products to use.
ASSEMBLY
Insert the four long tubes (4) into the side connectors (6) and repeat the step until
1
all short tubes are fixed in place.
6
2
Insert the short tubes (5) into the side connectors and repeat the
step until all short tubes are fixed in place.
5
4
4
5
5
5
5
6
4
4
6
5
5
5
5
5
6
4
5
5