Cleaning And Maintenance - Soba NT610 Gebrauchsanleitung

NT610 UNIVERSAL WARMER

CLEANING AND MAINTENANCE

1. Before cleaning the appliance make sure that it has been disconnected from the
mains and that it has cooled down.
2. The universal warmer can be dismantled completely; this makes it very easy to
clean.
3. Open and remove the covers (5) first, before removing the plate holder (4).
4. Activate the safety bolt by pushing it forward with your finger to release the heat-
ing element; remove the heating element (2). (fig. 1)
5. Wipe all parts clean with a soft damp cloth.
6. The textile cosy can be washed at 40° C.
STORAGE
1. Wind the power lead round the cable tidy un-
der the unit. (fig. 2)
2. When not in use store the appliance in a dry
place.
SPECIFICATIONS
Power
Power
Capacity
Dimensions:
Subject to change without prior notice.
230 Volt
350 Watt
10 plates, Ø to 33 cm
L 34.5 x W 26 x H 25
5
INSTRUCTIONS
safety bolt
fig
( . 1)
fig
( . 2)