CombiSteel 7490.0113 Montageanleitung

Assembly Instructions
S/S Round Tube Shelf
Safety Tips

Whilst all care has been taken to remove sharp edges, care must be taken
when cleaning or handling to prevent risk of injury from exposed metal edges.

Do not overload the shelf causing it to bend.
Part List
Note: Be sure to check all packaging materials for any small parts that may have come loose
during transport.
Assembly
1. Remove all protective film, taking care to avoid scratching the surface.
2. Slot the Bracket on to the studs on the Tubes
3. Position the supports as required. Slot the washer over the studs, then screw on the nuts.
［Fig 1,2 3.］
4. Attach the shelf to the wall using suitable screws (not supplied) ［Fig.4］
Note: Ensure the mounting substrate can support the weight of the shelf.
Before using for the first time we recommend the shelf is cleaned thoroughly with a suitable
cleaning agent. Remove all cleaning residues and dry thoroughly.
Fig.1
Fig.3 Fig.4
Cleaning

Clean the shelf regularly using a cleaning agent suitable for use with stainless steel and
galvanised surfaces.

Always remove cleaning agents residues, this can discolour the surface.

Never leave any surface damp as this may cause discolouration.
Fig.2 Fig.3