Rosenbauer RESCUE II Benutzerinformationen Seite 9

Abrasion resistance - EN 388
Cut resistance - EN 388
Tear resistance - EN 388
Puncture resistance - EN 388
(Dexternity - EN 420
Cut resistance Coupe-test – EN 388
Knuckle protection
Testing and certification body
Institute for Ecology, Technology and Innovation GmbH (ID-No.: 0534);
Certificate no.: VN620 143082
LIMITATIONS TO USE
The protective glove should be checked for damage following subjection to high
mechanical, chemical or thermal loads.
Penetrative abrasion or surface damage due to heat, or chemicals, etc. can have a
negative effect on protection levels. It is essential that protective gloves showing such,
or similar, damage are discarded. These gloves do not offer protection against chemical,
bacteriological, electrical or thermal hazards. Do not use when working with rotating
parts. Damaged gloves reduce the protective properties of the gloves and must be
replaced.
STORAGE
The protective gloves should be dry stored in normal room atmosphere.
CLEANING/CARE
The gloves are washable. Hand washing recommended. Gloves can be washed at
temperatures of up to 60 °C to remove severe contamination.
Do not use bleaches or oxidising agents!
RESCUE II – Rosenbauer
3
5
3
3
5)
F
P
FR
EN
9