Sparco TS-XW RACER Handbuch Seite 2

ENGLISH: CHECKING AND, IF NECESSARY, RECONFIGURING THE RACING WHEEL'S CENTER VALUE
Check the racing wheel's center value:
•
- On PC, access the Control Panel, then set the rotation angle to 1080° using the slider.
- Turn your wheel until you reach the 50.0% axis marker displayed in the Control Panel, and then check to make sure
that your racing wheel is perfectly centered, physically (i.e. completely horizontal).
Reconfiguring the racing wheel's center value
•
(If the racing wheel is slightly off-center in the Control Panel)
- If using a Xbox One™, we recommend performing this procedure in the Xbox One™ system's menu (not in a game).
- If using a PC, we recommend performing this procedure via the Windows® Desktop (not in a game), after exiting the
Control Panel.
1) Connect the racing wheel's USB cable (on Xbox One™ or on PC), then wait for the auto-calibration phase to end.
2) Turn the racing wheel fully to the left (until you reach the stop).
3) Turn the racing wheel fully to the right (until you reach the stop).
4) Make sure that your racing wheel is perfectly centered; while holding it in this position,
press the: VIEW + MENU + MODE buttons simultaneously
5) The racing wheel's LED briefly changes colour, then reverts to its initial colour.
This means that the wheel's center value has been reset and automatically saved to the device's internal memory
(you do not need to repeat the procedure every time you connect the racing wheel).
YOU ARE NOW READY TO RACE!
2