yellow jacket Stun Gun Produktanleitung Seite 10

Safety Guidelines:
Yellow Jacket® has two (2) safety features to
prevent accidental discharge.
Safety Switch: This switch prevents the
activator button from ring the unit unless it
is moved into the "ON" or FORWARD
position. When the Safety Switch is in the
"ON" or FORWARD position, a RED LED
indicator will illuminate below the switch.
Stun Gun Activation Switch: This switch
when slid into the forward position exposes
the electrodes. The electrodes must be
exposed in order for the device to re. Do
not extend or expose the electrodes unless
you are prepared to use the device. This
same switch/tab acts as the "trigger" to
initiate the electrical discharge of the unit.
Push and hold the Stun Gun Activation
Switch downward (inward) with enough
pressure to activate (trigger) the Yellow
Jacket® Phone Case.
Placing the Yellow Jacket® in Safe or
"Standby" Mode: Slide the Stun Gun
Activation Switch backward (towards the
base of the unit) to return the unit to SAFE or
STANDBY mode. The electrodes will not be
protruding from the top of the case when
the unit has successfully been placed in SAFE
or STANDBY mode. When the Yellow Jacket®
is placed in this con guration, it cannot be
activated for electrical discharge and the
electrodes are not visible, thus protecting
them as well.