Troubleshooting Guide - Co/Tech Rp8242 Bedienungsanleitung

10. Troubleshooting guide

I cannot jump start my vehicle.
• Make sure the switch (7) is in the ON position
• Press the Test button (10) to make sure that the jump starter is fully charged. Charge it if needed.
• Make sure the cables are correctly connected and with the correct polarity.
The USB port doesn't work.
• Make sure that the power switch (1) is pressed in and that the USB light is on.
• Press the Test button (10) to make sure that the jump starter is fully charged. Charge it if needed.
The LED worklight doesn't work.
• Press the power switch (8).
• Press the Test button (10) to make sure that the jump starter is fully charged. Charge it if needed.
Compressor does not inflate.
• Make sure the compressor power switch (15) is in the ON position.
• Make sure that the jump starter's battery is fully charged, charge it if necessary.
• Make sure that the car valve is pushed as far as possible into the air hose nozzle so that the locking lever
can be lowered (when inflating tyres) and that the valve adaptor nozzles are inserted in the air hose nozzle
(when inflating products without valves).
11. Disposal
Follow local ordinances when disposing of this product. If you are unsure of how to dispose
of this product, please contact your municipality. Lead-acid (Pb) batteries can be recycled.
They should not be disposed of like normal household waste.
12. Specifications
Charging current
Battery
LED worklight
USB port
12 V socket
Air compressor, max pressure 120 psi/8.28 bar
AC charger
Size
Weight
450 A instantaneously, 300 A after 5 seconds
Maintenance-free 12 V, 17 Ah sealed lead/acid battery
1 white LED with long operating life
5 V DC, 500 mA
For cigarette lighter plug, max 5 A
Power supply 220–240 V, 50 Hz
340 × 280 × 195 mm
7.5 kg
9