euroflex SPRINGLIGHT HCXS49 Bedienungsanleitung Seite 13

English
Attention: Deviating from the colour coding prescribed by the European
standard EN 1082-1: 1996, the size marking of UROFL X
may also be affixed by a sticker in the wristband area as an international
size, or in English language (see table above).
Size Selection
The correct size must not be too small, because the ring fabric is not elastic.
When the hand is open, therefore, the material must protrude on the finger,
which is required for unhindered movement.
Especially when working with electrically or pneumatically ope-
rated knives, the glove must not be too big, otherwise there is
a risk that the ring tissue may get caught by the movable machi-
ne parts.
Adjusting the Gloves
All UROFL X
®
right-handed use, i.e. for wearing on the left hand. By changing, these can
also be worn on the right hand (exception: arm protection glove). By simply
turning them, these can also be worn on the right hand.
UROFL X
®
SPRINGLIGHT safety gloves have a sewn-in stainless steel
spring wristband. As a result, no further settings are necessary.
Maintenance and Cleaning
UROFL X
®
SPRINGLIGHT safety gloves are made of a stainless steel ring
fabric, whereby each ring is individually welded. Even with a loss of a few
individual rings, the glove must be repaired to ensure safety. The repair may
only be carried out by specialised companies which can restore the original
condition. Please use our RENOFLEX service, which guarantees quality
restoration. Continuous loss of rings in several places indicates that the ring
braid is largely weakened (due to wear, fatigue, and the likes). The glove
SPRINGLIGHT safety gloves are supplied as standard for
13
®
safety gloves