Safety Regulations - Tele System Up1 Schnellstartanleitung

Safety Regulations

Connect power supply unit to 230V~ 50Hz socket.
The inside of the appliance could contain voltages
which could endanger the user. The device should
be disconnected from the electrical supply before
performing any intervention. Do not remove box
cover. Non-authorised removal will mean that the
warranty is no longer valid!
Before installing the appliance make sure that the
cable is intact. If the cable is damaged do not
attempt to connect the appliance and refer the
problem to an authorised center for assistance.
Keep the appliance far from any liquids. Do not
place any objects containing liquids on the
appliance. If the device should accidentally come
into contact with liquids, disconnect immediately
from the power socket. Do not touch the device
until it has been disconnected.
Before cleaning, disconnect the device from the
power supply. To clean the outside use a soft and
dry or slightly damp cloth. Avoid products which
contain chemicals or solvents.
Make sure that the area where the appliance is to
be installed has a good air circulation in order to
avoid overheating.