HMS STR24 Installation Seite 3

Step 1: Place the bottom flat on the ground.
Step 2: Put the thicker end of the rod into the
bottom hole, the thinner end up, remove
the black cover.
Step 3: Install the chassis directly onto the bar,
press the handle to adjust the joint he-
ight.
Step 4: Install the magnesium compact onto the
chassis and secure it with 4 screws.
Note: Please adjust your own height before installing the magnesium compact. If you want
to reduce the height after installing the compact, you need to remove the box body first and
then adjust the height. The screw can not be twisted slightly by hand.
EN
3