Technical Data; Disassembly And Disposal - Nissen Star-Flash LED 610 Bedienungsanleitung

2.6

Technical data

Star-Flash LED 610, 6 Volt, 1-sided yellow
Operating Voltage:
Peak current:
Average power input:
Flashing rate:
Operating time
Operating temperatures:
Star-Flash LED 610, 6 Volt, 2-sided yellow
Operating Voltage:
Peak current:
Average power input:
Flashing rate:
Operating time
Operating temperatures:
2
at laboratory conditions.
2.7

Disassembly and disposal

2.7.1 Disassembly
Before beginning the disassembly:
· Switch off the system and secure against being switched on again.
· Physically disconnect the entire power supply from the equipment and discharge stored residual energy.
Then professionally clean modules and components and disassemble in accordance with accepted local safety at work and
environment protection regulations.
2.7.2 Disposal
If no take back or disposal agreement was made, take disassembled component parts to the recycling depot:
· Dispose of metallic residual component parts as scrap metal.
· Take plastic parts to the recycling depot.
· Sort and dispose of other components according to the properties of the material.
CAUTION!
Damage to the environment from improper disposal!
Local authorities and specialist disposal companies can provide information on environmentally compatible disposal.
18
6,0 V
0,36 A
0,043 A
60 fl/min 1 Hz ± 10 %
2 900 hrs. with 2 batteries
approx.:
1600 hrs. with 2 batteries P3000
3000 hrs. with 2 batteries
from -25°C to +65°C
6,0 V
0,72 A
0,086 A
60 fl/min 1 Hz ± 10 %
2
450 hrs. with 2 batteries
approx.:
800 hrs. with 2 batteries P3000
1500 hrs. with 2 batteries
from -25°C to +65°C
Electronic scrap, electronic components, lubricants and other auxiliary substances are liable to treatment as
hazardous waste and must only be disposed by approved specialised companies!
Star-Flash LED 610
P800
K45
P800
K45
© 2017 Adolf Nissen Elektrobau GmbH + Co. KG
ENGLISH