C. Using the Handlebar Console as a Shoulder Bag
1. The Handlebar Console is shipped ready to be used on the carrier. The shoulder strap is pulled up into
the shortest position. When the Handlebar Console is removed from the carrier and is used as a
shoulder bag, the top of the bag is the end with two buckles.
2. Adjust the length of the strap by sliding the straps through the top and bottom strap keepers and side
release buckle. See Figure 3a & b.
3. The side release buckle can be used for easier wearing of the shoulder bag.
4. The shoulder bag strap can be adjusted for right or left side wearing. To move the strap from side to
side, unhook the gate keeper connector as shown in Figure 4a.
5. Move the strap and gate keeper to the desired side and slide the gate keeper through the loop as shown in
Figure 4b. Re-latch the hook as shown in Figure 4c.
Figure 4a
D. Handlebar Console Features
Figure 3a
Figure 4b
Figure 5
Figure 3b
Figure 4c