ANSMANN ALL in ONE 3 Produktübersicht & Grundfunktionen Seite 14

setting uP the PLug for
switzerLand / itaLy
Europe
man & Fr ench
Push out the Switzerland / Italy plug until it locks into place (as described
above) (1). Changing from the Italian to the Swiss plug (all three pins must
be aligned in a row): Push middle pin to the left with slight force until you
hear a distinct "click" (2). Then push the pin on the top to the right (3).
The adapter is not ready for use until all three pins are in the vertical
position. To change to the setting for Italy, simply reverse the procedure (4).
14
manual_all_in_one_3_10-04.indd 14
Switzerland Italy
1
Europe
German & Fr ench
3
click!
2
Sc hw ei
4
12.05.10 16:45