Flip 100201-RR Benutzeranleitung Seite 3

Loading your camcorder into the Flip Video™ Underwater Case
IMPORTANT
Before using the Flip Video™ Underwater Case, make sure that it is completely dry and clean. A single
grain of sand or strand of hair can break the seal, resulting in leaks and possible damage to your
camcorder. Use a clean, soft, lint-free cloth to dry the case.
Open the Flip Video™ Underwater Case
1
by lifting the safety latch and turning the
locking knob counterclockwise.
Place camcorder in underwater case
2
bottom end first and align the front
of the camcorder with the lens of the
case. Camcorder will fit snugly.
Close the underwater case.
3
Turn the locking knob clockwise
until the yellow lines on the knob
and back of case line up. Then,
press the safety latch down flat
into locked position.
1
3
English
2
1