Avaya VarioRec 6 Kurzanleitung Seite 2

®
VARIOREC
Wireless Emergency Call Technology
Warning
The use of a call device does not release supervisors from the obligation to supervise the persons supported by such a
device.
This system is radio-based and therefore may not be used for monitoring purposes if life-threatening conditions are
foreseeable. This quick reference guide does not release the user from the obligation to read and understand the contents
of the complete
Note: In this quick reference guide the
This quick reference guide describes only the basic functions. It does not cover failures.
Starting the Radio Receiver and Receiving a Radio Call
1
Before a radio receiver can detect a radio transmitter, the latter has to be programmed in the radio receiver.
1
Press and hold the right-hand
button when plugging
5a
...or...
Briefly press
right-hand
button
middle-hand button
transmitter
Nurse call and personal transmiter technologies
Lehmann Electronic GmbH Germany
All manuals and user guides at all-guides.com
Quick reference Guide
Variorec6 manual LE399 EN
"VarioRec6 radio receiver" is referred to as "radio receiver" or "receiver".
2
Green
Receiver is
operational
Programming a Radio Transmitter
2
Green
flashing light
Receiver is in
programming mode
6a
5b
1.5 s green
The new radio
transmitter has
Briefly press
been programmed
pull switch
Rehab and care technology
Copyright © 2019
VarioRec 6
3
Trigger
radio call
(transmitters already programmed)
3a
...or...
Trigger
radio call
transmitter
...or...
6b
1,5s orange
The new pull
switch has been
programmed
Phone.: +49 2208 9492 0
LE400 V1.00 page 2 of 4
4
1.5 s red
Receiver indicates and
transmits call
4
3b
1.5 s red
New radio
transmitter
Trigger
has been detected
radio call
pull switch
8
7
Press and
Receiver is
hold
operational again
the left-hand
button
Fax.: +49 2208 9492 32
www.lehmannweb.de
Green