limoss BS-5 Kurzanleitung

linear
motion
systems
1 .Specifications
BS-5
0-400C during charging
0-400C during discharging
Humidity:
65±200/0 RH
Storage and transport
Short-term (less than I
Long-term (less than 6 months):230C±
1.1 External dimensions:
The connector of input and output in picture are only for information.please
1.2 Cable Connection:
1.2.1 The LED flashes red while charging,turn
1.2.2 Discharge without switching
If battery is humming,please
1.2.3 Discharging with SMPS,SMPS
with uninterruption.
• Charge battery pack before first use once completely. The charging time of BS-5 is approximately
The charging time of BS-6 is approximately
• If battery pack is humming, please recharge immediately.
• WARNING-use of Li-lon batteries
must be read.
• Battery pack should be treated with great carelDo not throw,drop,or
If unit has been damaged, it must not be put into operation.
• Do not expose to fire or disassemble!
• Do not immerse in waterl
• Keep away from children!
• Storage in dry well-ventilated
• The voltage or amperage of battery must not be exceeded.
Use with the provided power supply only.
• Operate and Store battery within those parameters.
• After 3 months of storage, charge the battery fully,even
Manufacturer :
Huizhou Zhongbang Electronics Co., Ltd.
No.2 Pingnan Mid-road,Pingnan
Made in China
Akku
Model:BS-5/BS-6
Match
BS-6
conditions:
1OOC
to green when fully charged.
power supply:
recharge immediately.
will supply power. If SMPS stop working,power
18.5 Hours(not
must be extremely carefully. All instructions
area.
Industrial District
Pack Guidance
code:MC168
4•1.7 DC-IN Jack:for special charger
for special charger).
if it is not used.
Huizhou,Guangdong,China
take practicality
will switch to battery pack
provided with the battery pack
expose it to strong vibrations.
limoss
as standard.
13.5 Hours.
limoss
limoss GmbH & Co. KG
Obenvengener Str_204
0-58300 Wetter
2335 84713-0
Fax •4g 2335 84713.29
limoss@imoss.de
www.limoss.de