LT95021 Bamboo wireless speaker Instruction Manual
2
3
6
Toppoint B.V. hereby declares that this product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU. The complete Declaration of Conformity
can be found at www.toppoint.com . search on item number.
TP is not responsible for any damage caused by improper use of the product or negligence.
High sound pressure, Hearing damage risk,
EN
Do not listen at high volume levels for long periods.
OVERVIEW
SPECIFICATIONS:
1. Wireless Charging Pad
Item: LT95021
2. Vol-/Previous Track
Wireless Output Power: 5W
3. Play/Pause/ON/OFF
Input: DC 5V / 2A
4. Light button
Battery capacity: 3.7V/1800mAh 6.66Wh
5. Vol +/Next Track
Speaker output power:3W
6. Wireless Charging LED Indicator
7. Charging LED Indicator
Bluetooth:2402MHz-2480MHz, Max E.I.R.P: 1.31dBm
8. Bluetooth LED Indicator
Wireless charging:100KHz-300KHz, Max H-field:
9. TYPE-C charging port
7.20dBμA/m@10m
OPERATION INSTRUCTIONS
1. Power On: Hold the "" "" button for 3 seconds to turn on the speaker. The indicator light will turn
blue and you will hear a tone.
2. Pairing: Once speaker is turned on, using your mobile device, search for Bluetooth devices and
select Bluetooth ID '25600'. It will pair automatically.
3. Power Off: Hold the "" "" button for more than 3 seconds to turn off the speaker.
4. Play/Pause: Tap the "" "" button once to pause/play music
5. Next track/Vol+: Tap the ""+"" button once to switch to next track. Hold the ""+"" for 3 seconds to
increase music volume.
6. Previous Track/Vol-: Tap the ""-"" button once to return to previous track. Hold the ""-"" for 3
seconds to decrease music volume.
1
5
4
9
8
7
EN
7. Light: Tap the ""
"" button to cycle between 3 brightness settings: ""High,"" ""Low,"" and ""Off.""
8. Charging Speaker: Use the USB cable included to connect the speaker to an adaptor. The LED
indicator will display a solid red light. When the speaker is fully charged, the red light will turn
off.
9. Wireless charging:Use the USB cable included to connect the speaker to an adaptor. Place a Qi
enabled mobile device on top of the charging pad. The LED indicator will display a solid green
light. The mobile device will begin to charge automatically.
ATTENTION:
1. Prolonged or repeated exposure to sounds in excess of 85dBA can cause hearing loss.
2. To prevent damage to the speaker, do not drop or bump. Avoid exposure to water, high
temperature and high humidity.
3. Keep away from children.
4. Music volume decreasing, distorting, slowing or silencing may indicate low power level. The
battery will need to charge.
5. Please do not disassemble the speaker.
6. When not in use the device will turn off automatically. Please disconnect from power source.
Hoge geluidsdruk , Risico op gehoorbeschadiging ,
Luister niet langdurig naar hoge volumes.
NL
OVERZICHT:
SPECIFICATIES:
1. Draadloos opladen
1. ItemLT95021
2. Vol-/Vorige nummer
2. Draadloos uitgangsvermogen: 5W
3. Afspelen/pauze/aan/uit
3. Input: DC 5V / 2A
4. Licht knop
4. Batterijcapaciteit: 3.7V/1800mAh 6.66Wh
5. Vol +/Next Track
5. Speaker uitgangsvermogen: 3W
6. LED-indicator voor draadloos opladen
7. LED-indicator voor opladen
Bluetooth: 2402MHz-2480MHz, Max E.I.R.P: 1.31dBm
8. Bluetooth LED-indicator
Draadloos opladen: 100KHz-300KHz, Max H-veld:
9. TYPE-C oplaadpoort
7.20dBμA/m@10m
BEDIENINGSINSTRUCTIES
1. Aanzetten: Houd de knop "" "" 3 seconden ingedrukt om de luidspreker aan te zetten. de
luidspreker in te schakelen. Het indicatielampje wordt blauw en u een toon horen.
2. Koppelen: Zodra de luidspreker is ingeschakeld, zoekt u met uw mobiele apparaat naar
Bluetooth-apparaten zoeken en Bluetooth ID '25600'. Het zal automatisch koppelen.
3. Uitschakelen: Houd de knop "" "" langer dan 3 seconden ingedrukt om de luidspreker uit te
schakelen.
4. Afspelen/Pauze: Tik eenmaal op de toets "" "" om muziek te pauzeren/af te spelen.
5. Volgende track/Vol+: Tik eenmaal op de toets "" + "" om naar de volgende track. Houd de "" +""
3 seconden ingedrukt om het muziekvolume te verhogen.
6. Vorige track/Vol-: Tik eenmaal op de toets "" - "" om terug te keren naar het vorige nummer.