Sygonix MIFARE Sicherheitshinweise

Safety Instructions
MIFARE Keypad, 13.56 MHz, IP66
Item no: 3439970
1 Operating Instructions for download
Use the link www.conrad.com/downloads
operating instructions (or new/current versions if available). Follow the instructions on the web page.
2 Intended use
This product is designed to prevent unauthorised access to doors (e.g. in an office) and to activate/dis-
able alarm systems.
The product is intended for vertical installation on a wall.
Note:
The product has an IP66 ingress protection rating and is suitable for outdoor use. Is installed cor-
retctly, the product is protected against dust and water spray from all directions. Do not submerge.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the safety instructions and any accompanying instructions carefully and store them in a safe
place. Make this product available to third parties only together with the safety instructions and any ac-
companying instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
3 Delivery contents
■
Access control
■
2x Screws
■
2x Dowels
4 Description of symbols
The symbol warns of hazards that can
lead to personal injury.
5 Safety instructions
Read this document and the accompanying operating instructions carefully and es-
pecially observe the safety information. If you do not follow the safety instructions
and information on proper handling, we assume no liability for any resulting per-
sonal injury or damage to property. Such cases will invalidate the warranty/guaran-
tee.
5.1 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing ma-
terial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised
repair centre.
5.2 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
5.3 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and
solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
5.4 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer
be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Drilling
When penetrating the surface (example: drilling or inserting fasteners), make sure no
cables or pipes are damaged. Inadvertently penetrating electric cables causes the life-
threatening danger of an electric shock! Check for concealed wires and pipes before
drilling or inserting fasteners.
1
(alternatively scan the QR code) to download the complete
■
1x Torx head wrench
■
1x Diode
■
Safety sheet
The symbol warns of dangerous voltage
that can lead to personal injury by elec-
tric shock.
5.6 Installation or maintenance
WARNING
Risk of electric shock!
Switch the power OFF and/or disconnect the power supply at the circuit breaker be-
fore installation or maintenance.
Always ensure that electrical work is carried out by a qualified electrician and in ac-
cordance with local regulations and standards.
6 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They dam-
age the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Clean the product with a dry, fibre-free cloth.
7 Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product
conforms to the 2014/53/EU directive.
■
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of con-
formity in the available languages.
8 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU
market. This symbol indicates that this device should not be disposed of as unsorted muni-
cipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it sep-
arately from unsorted municipal waste. Spent batteries and accumulators, which are not
enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-
structive manner, must be removed by end users from the WEEE in a non-destructive
manner before it is handed over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of
waste. Conrad provides the following return options free of charge (more details on our website):
■
in our Conrad offices
■
at the Conrad collection points
■
at the collection points of public waste management authorities or the collection points set up by
manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in coun-
tries outside of Germany.
9 Technical data
9.1 Power supply
Input ...................................................... 12 - 18 V/DC
Power consumption............................... <50 mA (standby)
Active current......................................... 80 mA
9.2 Product
User capacity......................................... 1000 cards / PINs (990 Normal + 10 Visitor)
PIN length.............................................. 4-6 digits
Card type............................................... 13.56 MHz MIFARE
Read Range .......................................... (card) 3 cm, (tag): 1 cm
Wiring connections ................................ relay output, exit button
Relay ..................................................... One (NO, NC, Common), max. 12/24 V/DC, 3A
Relay output time................................... 0~99 secs (5 secs default)
Lock output load .................................... 3 Amp
Maximum Cable length.......................... 50 cm
Housing materials.................................. Zinc-alloy
9.3 Wireless module
Wireless frequency band....................... 13.553 - 13.567 MHz
Wireless transmission power ................ 17.25 dBµA/m
Reading distance (max.)........................ approx. 3 m
9.4 Environment
Ingress protection.................................. IP66
Mounting location .................................. indoors/outdoors
Operating temperature ......................... -40 to +60 °C
9.5 Others
Dimensions (W x H x D) (approx.) ........ 76 x 120 x 25 mm
Weight (approx.) ................................... 470 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*3439970_V1_0925_dh_ss_en 18014400886852491 I3/O1 en