Hama 00095596 Bedienungsanleitung Seite 2

Fig. 1a Fig. 1b
Fig. 2
G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
Fig. 1c
information completely. Please keep these instructions in a
safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sufficient magnitude to constitute a
risk of electric shock.
2. Package Contents
• 3D shutter glasses
• Lithium coin battery (CR 2025)
• These operating instructions
3. Safety Notes
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Do not drop the product and do not expose it to any
major shocks.
• Do not open the device or continue to operate it if it
becomes damaged.
• As with all electrical devices, this device should be kept
out of the reach of children.
Warning
• Never use the product for any other purposes (for
example as prescription glasses, sunglasses, safety
glasses, etc.), even for a brief period of time! This
could result in physical harm or impaired vision.
2
• Ensure that no fragile objects are nearby when you are
Transmittance:
using the 3D function. You could damage these objects
or be injured.
Battery life:
• Watching 3D television for extended periods of time
may cause headaches or eye strain. Take a break if
Power supply:
you are not feeling well. Consult a physician if this
condition does not improve.
Operating
• Pregnant women and persons with heart problems,
temperature:
epilepsy or mild nausea should not use the 3D
function.
Non-operating
temperature:
Epilepsy Warning
5. Startup and Operation
Switching the device on:
Your television's 3D playback and flashing lights, such as
• Press the button on the top (Fig. 2).
are found in some films or video games, may cause some
• The LED flashes red for 3 seconds.
viewers to suffer an epileptic seizure or stroke. Consult a
• Maintain the usage range recommended of 5 m or less
physician before using the 3D shutter glasses if there is a
in order to ensure optimal functioning of the 3D shutter
history of epilepsy or strokes in your family.
glasses. The 3D projector's signal may not be properly
received on the edge of this range or outside of this range.
Warning
Initial synchronisation:
• Press the button on the top for 3 seconds (Fig. 2).
• When inserting batteries, note the correct polarity
• Once they are synchronised, the 3D glasses will find the
(+ and - markings) and insert the batteries accordingly.
signal automatically the next time they are switched on.
Failure to do so could result in the batteries leaking
or exploding.
• Do not short-circuit batteries.
• Do not charge batteries.
Ensure that the distance between the glasses and the TV
• Do not throw batteries in a fire. is no more than 50 cm during the initial synchronisation.
• Keep batteries out of the reach of children.
• The LED flashes red during synchronisation.
• Do not allow children to change batteries without
• The LCD glasses flicker when they have located the signal.
supervision.
• The LED switches off automatically if it is unable to locate
• Remove the batteries from products that are not being a signal.
used for an extended period.
4. Intended and specifications
• The active 3D shutter glasses are compatible with standard
• For the best 3D results, always shut off the lights.
Panasonic 3D televisions with RF data transmission.
• The 3D function requires compatible hardware.
• Devices such as microwave ovens or DECT telephones
Lenses: Liquid crystal
Weight of the
29 g (with battery)
glasses:
Signal: RF
• If the signal is lost during the 3D experience, the 3D
Contrast ratio 1000:1
Switching the device off:
38% +/- 2%
• Press the button on the left side (Fig. 2).
• The LED flashes red three times.
80 hours of continuous use
6. Care and Maintenance
Changing the battery:
1x CR2025 lithium button cell
(3V, 150mAh)
Warning
0°C ~ 50°C
Ensure that the batteries are inserted the right way around
and that polarity (+ and -markings) is observed.
-10°C ~ 50°C
• Open the battery compartment on the right side (Fig. 1)
• Insert the CR2025 batteries, observing polarity and close
the battery compartment.
• Use a soft, lint-free cloth to clean the device.
• Never use aggressive cleaning agents or cleansers
containing alcohol, as they can damage the surface of
the LCD lenses.
Note
Check that the 3D glasses are safe to use at regular
intervals (at least every three months). Do not use the
shutter glasses if they are damaged.
7. Warranty Disclaimer
Note - Initial synchronisation:
Hama GmbH & Co. KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any
questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
Note www.hama.com
Energy-saving lamps or fluorescent lamps may interfere
with the functioning of the 3D glasses.
can interfere with the transmission of the 3D signal.
For this reason, it is important to ensure that other
electronic or wireless communication devices are kept
as far away from the glasses as possible.
glasses switch off automatically.
3