Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Software operation
1. Add Camera
Note: Since IP cameras in NVR kit have been matched code by factory there is no need
to add again. If you need to match code, please connect wireless IP camera to any of
NVR LAN port and apply power, but make sure there is some channel available for
camera.
Steps: Right click mouse to get main menu, go to→System Setup→Channel Setup,
click" quick adding", then it pops up "video manage"
Two ways to add IP camera to NVR "Code Add" and "Auto Add".
Code add: the camera transmits video images to NVR by wifi, IP is 17.20.14.X.
Auto add: the camera transmits video images to NVR by network cable, IP is
172.25.123.X.
2. Video Playback
Step: Right click mouse to get main menu, go to:
→Video playblack→Channel No.→Record mode →Search time (input beginning time
and ending time)→click Search. Recording will come out, drag time bar→click Playback
to start.
Playback icon introduction:
playback previous frame
playback next frame
play
pause
fast forward x2, x4, x8
Werbung
