Manhattan 153546 Anleitung Seite 2

2
7 1 3
1 Connect a keyboard and a mouse to the USB ports.
2 Connect display to the DisplayPort output.
3 (Optional) Connect a mic, a speaker or both to the KVM outputs.
4 Use the included combo cables to connect the appropriate ports
on your computers (DisplayPort, USB-A, mic and speaker cables) to
the KVM inputs (DisplayPort, USB-B and combo audio cable).
5 (Optional) Plug in a USB device to the USB hub port on the front of the KVM switch.
6 Turn on your connected computers and equipment.
7 This KVM switch is USB powered. If more power is needed, connect
an appropriate power supply (9.0 V / 0.3 A) to the power input.
8 Switch between your computers via the buttons on the front of the KVM switch
(a buzzer sounds to indicate success) or use the hotkeys described below.
• LEDS: Red = computer is online;
Green = computer is selected
NOTE: If it is necessary to turn off the power to the switch, you
must do the following before turning it back on:
1 Unplug the data cables from all the computers connected to the switch.
2 Unplug the power adapter cable from the switch if one is connected.
3 Wait 10 seconds. If a power adapter was connected, plug
the power adapter cable back into the switch.
4 Connect the computer data cables and turn on the computers.
2
English
User Manual
4
Setup
5 8