Herunterladen Inhalt Inhalt Diese Seite drucken
LED-Bett SORINA 140 / 160 x 200 cm
Please check that all parts are included before starting assembly. If you specify that something is
missing, do not continue the assembly. Please contact us immediately. Please read the complete
instructions before installing this product. Please let at least two people participate in the assembly
of this product!
Attention: Please do not tighten all screws before assembly is complete!
Bitte überprüfe, ob alle Teile mitgeliefert sind, bevor du mit der Montage beginnst. Wenn du
festlegst, dass etwas fehlt, setze die Montage nicht fort. Bitte kontaktiere uns sofort.
Bitte lese die vollständige Anleitung, bevor du dieses Produkt montierst. Bitte lasse mindestens zwei
Personen an der Montage dieses Produkts teilnehmen! Achtung: Bitte ziehe nicht alle Schrauben
fest, bevor die Montage abgeschlossen ist!
Vérifiez que toutes les pièces sont incluses avant de commencer l'assemblage. Si vous définissez
Si quelque chose manque, ne continuez pas avec l'Assembly. Contactez - nous immédiatement.
Veuillez lire les instructions complètes avant d'installer ce produit.Veuillez faire participer au moins
deux personnes à l'assemblage de ce produit!
Remarque: s'il vous plaît ne pas serrer toutes les vis avant l'assemblage est terminé!
Inhaltsverzeichnis
loading

Inhaltszusammenfassung für Home Deluxe SORINA

  • Seite 1 LED-Bett SORINA 140 / 160 x 200 cm Please check that all parts are included before starting assembly. If you specify that something is missing, do not continue the assembly. Please contact us immediately. Please read the complete instructions before installing this product. Please let at least two people participate in the assembly...
  • Seite 2: Lieferumfang

    Lieferumfang 1/2 1. 1pc 2. 1pc 4. 2pcs 5. 1pc 6. 1pc 7. 1pc 8. 1pc 16. 1pc 17. 1pc 20. 1pc 21. 1pc 27. 1pc 28. 1pc 22. 1pc 23. 1pc 24. 2pcs 25. 1pc Lieferumfang 2/2 12. 1pc 3.
  • Seite 3: Übersichtszeichnung

    Service- oder Technikerteam verfügt. Für die ordnungsgemäße Montage und Anschlussarbeiten ist der Kunde selbst verantwortlich. Wir weisen darauf hin, dass die Home Deluxe GmbH grundsätzlich keine Kosten für Montage oder handwerkliche Leistungen – wie etwa Elektrikerkosten oder vergleichbare Fachmannkosten übernimmt.
  • Seite 4 Schritt:1 Bx6pcs Cx4pcs Schritt:2...
  • Seite 5 Schritt:3 Ax4pcs Ax2pcs Schritt:4...
  • Seite 6 Schritt:5 Ax10pcs Ax 12pcs Schritt:6 Dx 4pcs...
  • Seite 7 Schritt:7 Cx 2pcs Schritt:8 Ax16pcs...
  • Seite 8 Schritt:9 Ax4pcs Ax 2pcs Schritt:10 Bx 2pcs...
  • Seite 9 Schritt:11 Bx 8pcs Schritt:12 Bx 3pcs...
  • Seite 10 Schritt:13 Ax 6pcs Schritt:14...
  • Seite 11 Schritt:15 Ax 4pcs Bx 3pcs Schritt:16 Ax 6pcs...
  • Seite 12 Schritt:17 The cylinder of the cylinder frame is not fully installed NO.1 Please open the bed frame NO.2 Please unscrew the screw on the other end and lock it as NO.2 shown in the picture. Der Zylinder des Zylinderrahmens ist nicht vollständig installiert. NO.1 Bitte öffne den Bettrahmen NO.2 Bitte schraube die Schraube am anderen Ende ab und...
  • Seite 13 Schritt:19 Schritt:20...
  • Seite 14: Mattresses Owner's Manual/ Matratzen Bedienungsanleitung/ Manuel D'utilisation Matelas

    IMPORTANT NOTE/ WICHTIGER HINWEIS/ Conseils importants Mattresses Owner's Manual/ Matratzen Bedienungsanleitung/ Manuel d'utilisation matelas Once your bed frame is fully assembled, the slatted unit will not work properly unless a mattress is placed on the slatted frame. Place the mattress in a closed position on the slatted frame. PLEASE NOTE -The initial movement of the mattress requires a lot of force.
  • Seite 15 LED Bett SORINA - 140 x 200 cm Beige - Paket 1 von 2 (Kopfteil, Metallauflage, Mittelstütze) Artikel-ID: 29334 | Varianten-ID: 74596 LED Bett SORINA - 140 x 200 cm Beige - Paket 2 von 2 (Seitenteile, Fußteil, Latten, Schraubenset) Artikel-ID: 29335 | Varianten-ID: 74597 LED Bett SORINA - 160 x 200 cm Beige - Paket 1 von 2 (Kopfteil, Metallauflage, Mittelstütze)
  • Seite 16 LED-Bett SORINA 180 / 200 x 200 cm Please check that all parts are included before starting assembly. If you specify that something is missing, do not continue the assembly. Please contact us immediately. Please read the complete instructions before installing this product. Please let at least two people participate in the assembly...
  • Seite 17: Lieferumfang

    Lieferumfang 1/2 1. 1pc 2. 1pc 4. 3pcs 5. 1pc 6. 1pc 20. 2pcs 21. 2pcs 7. 1pc 8. 1pc 16. 1pc 17. 1pc 27. 1pc 28. 1pc 22. 1pc 23. 1pc 24. 2pcs 25. 1pc Lieferumfang 2/2 9. 1pc 10.
  • Seite 18 Übersichtszeichnung...
  • Seite 19 Schritt:1 Bx9pcs Cx4pcs Schritt:2...
  • Seite 20 Schritt:3 Ax4pcs Ax2pcs Schritt:4...
  • Seite 21 Schritt:5 Ax10pcs Ax 12pcs Schritt:6 Dx 4pcs...
  • Seite 22 Schritt:7 Cx 4pcs Schritt:8 Ax16pcs...
  • Seite 23 Schritt:9 Ax4pcs Ax 2pcs Schritt:10 Bx 2pcs...
  • Seite 24 Schritt:11 Bx 8pcs Schritt:12 Bx 6pcs...
  • Seite 25 Schritt:13 Ax 8pcs...
  • Seite 26 Schritt:15 Ax 4pcs Bx 4pcs Schritt:16 Ax 6pcs...
  • Seite 27 Schritt:17 The cylinder of the cylinder frame is not fully installed NO.1 Please open the bed frame NO.2 Please unscrew the screw on the other end and lock it as shown in the picture. Der Zylinder des Zylinderrahmens ist nicht vollständig installiert NO.2 NO.1 Bitte öffne den Bettrahmen NO.2 Bitte schraube die Schraube...
  • Seite 28 Schritt:19 Schritt:20...
  • Seite 29 IMPORTANT NOTE/ WICHTIGER HINWEIS/ Conseils importants Mattresses Owner's Manual/ Matratzen Bedienungsanleitung/ Manuel d'utilisation matelas Once your bed frame is fully assembled, the slatted unit will not work properly unless a mattress is placed on the slatted frame. Place the mattress in a closed position on the slatted frame. PLEASE NOTE -The initial movement of the mattress requires a lot of force.
  • Seite 30 LED Bett SORINA - 180 x 200 cm Beige - Paket 1 von 2 (Kopfteil, Metallauflage, Mittelstütze) Artikel-ID: 29338 | Varianten-ID: 74600 LED Bett SORINA - 180 x 200 cm Beige - Paket 2 von 2 (Seitenteile, Fußteil, Latten, Schraubenset) Artikel-ID: 29339 | Varianten-ID: 74601 LED Bett SORINA - 200 x 200 cm Beige - Paket 1 von 2 (Kopfteil, Metallauflage, Mittelstütze)
  • Seite 31: Ultradünne Touch-Slide-Rf-Fernbedienung

    RF DIM/CCT/RGB/RGBW/RGB+CCT Ultradünne Touch-Slide-RF-Fernbedienung ● Geeignet für einfarbige, zweifarbige, RGB-, RGB+W- oder RGB+CCT-LED-Controller. ● Hochempfindlicher Touch-Schieberegler zur Farbanpassung. ● Jede Fernbedienung kann mit einem oder mehreren Empfängern gekoppelt werden. ● Stromversorgung über CR2032-Batterie. ● Betrieb mit LED-Anzeigeleuchte. ● Magnet auf der Rückseite, der leicht an der Rückhalterung oder anderen Metalloberflächen befestigt werden kann.
  • Seite 32: Sicherheitshinweise

    Tastenfunktion ● ● 1-Zonen-CCT- 1-Zonen-Dimmfernbedienung Fernbedienung LED-Anzeige LED-Anzeige Kurzes Drücken zum Ein- oder Ausschalten des Ein/Aus Ein/Aus Lichts. Langes Drücken (1–6 Sekunden) zum Einstellen der Helligkeit. WW 100 % 100 % CW 0 % WW 50 % Helle Touch-Folie Farbiger Touch- 50 % CW 50 % Schieberegler...
  • Seite 33: Tasten-Wifi- Und Rf-Rgb+Cct-Led-Controller

    VD5(WT) WiFi 3-Tasten-WiFi- und RF-RGB+CCT-LED-Controller ● WiFi- und RF-5-Kanal-LED-Controller mit konstanter Spannung für RGB+CCT. ● Tuya Smart APP Cloud-Steuerung, unterstützt Ein-/Ausschalten, RGB-Farbe, Farbtemperatur- und Helligkeitsanpassung, verzögertes Ein-/Ausschalten des Lichts, Timer-Betrieb, Szenenbearbeitung und Musikwiedergabefunktion. ● Sprachsteuerung, unterstützt Amazon Alexa, Google Assistant, Tmall Genie und Xiaodu Voice Assistant.
  • Seite 34: Systemverkabelung

    Systemverkabelung Kabelgebundene Verbindung 3G/4G/5G Tuya Cloud WiFi Drahtlose Verbindung WiFi 15 m WLAN-Router Mobiltelefon Smart Speaker RGB+CCT 30 m RF-Fernbedienung RGB+CCT (optional) 30 m Panel-RF-Fernbedienung (optional) Hinweis: oben angegebene Entfernung wurde in einer weitläufigen Umgebung (ohne Hindernisse) gemessen. Bitte beachte vor der Installation die tatsächliche Testentfernung. Bitte überprüfe, ob der WLAN-Router im 2,4-GHz-Band arbeitet, das 5-GHz-Band nicht verfügbar ist, und bedecke deinen Router-Netzwerk nicht.
  • Seite 35: Fernbedienung Koppeln (Zwei Kopplungsmethoden)

    Tuya Smart APP-Oberfläche Schnittstelle für Farbtemperatur Farbschema Berühre das Farbrad, um die Farbtemperatur Berühre das Farbrad, um die statische RGB-Farbe anzupassen. WW/ anzupassen. RGB wird automatisch ausgeschaltet. CW wird automatisch ausgeschaltet. Berühre den Helligkeitsregler, um die Weißhelligkeit Berühre den Schieberegler für die Helligkeit, um die Farbhelligkeit anzupassen.

Diese Anleitung auch für:

Melura 9317Melura 2932

Inhaltsverzeichnis