Herunterladen Diese Seite drucken
N657P326565
Product manual
Gebrauchsanweisung
Manuel du produit
Manual del producto
Manuale del prodotto
Tool Required Not Provided
2PERS
45 MIN
loading

Inhaltszusammenfassung für Decobus Handel N657P326565

  • Seite 1 N657P326565 Product manual Gebrauchsanweisung Manuel du produit Manual del producto Manuale del prodotto Tool Required Not Provided 2PERS 45 MIN...
  • Seite 2 [DE] Warnung: Lesen Sie die Anleitung vor dem Zusammenbau bitte vollständig durch. Überprüfen Sie, ob Sie alle auf den Seiten aufgeführten Komponenten und Werkzeuge haben. Warnung: Legen Sie alle Teile auf eine ebene Fläche. Legen Sie eine weiche Decke oder Ähnliches darunter, um sie vor Kratzern oder Flecken zu schützen.
  • Seite 3 Avertissement : Nettoyez les meubles avec un chiffon humide ou de l'alcool, évitez d'utiliser des produits de nettoyage contenant des produits chimiques corrosifs. Avertissement : Ce produit est équipé d'un dispositif anti-basculement. Assurez-vous d'installer ce dispositif pour éviter les blessures inutiles causées par un basculement. [IT] Attenzione: leggere attentamente le istruzioni prima di iniziare il montaggio.
  • Seite 4 6x30 M3.5x12mm 5X38 M4x12mm Large bend hinge 6x35 15x9.5 Cx16 Dx24 Ex16 Ax36 Bx36 M4x25mm M3x14mm M4x40mm M3x12mm M4x18mm M3.5x12mm M3.5x12mm Hx12 20mm...
  • Seite 7 N657P326565W 1415*80*15mm=4pcs 1415*147*15mm=1pc 1415*147*15mm=1pc 470*100*12mm=3pcs 502*188*12=1pc 502*360*15mm=1pc 470*357.5*12mm=1pc 470*357.5*12mm=1pc 455*358*15mm=1pc 455*358*15mm=1pc 470*80*12mm=2pcs 480*233*3mm=1pc 230*218*15mm=1pc 230*218*15mm=1pc...
  • Seite 8 M4x25mm Hx12...
  • Seite 9 6x35 Ax12...
  • Seite 10 15x9.5 Bx12...
  • Seite 11 6x30 5X38 M4x12mm...
  • Seite 12 6x30 5X38 6x35...
  • Seite 13 M3x12mm...
  • Seite 14 6x35 Ax16...
  • Seite 15 6x35 15x9.5...
  • Seite 16 6x30 15x9.5 Bx16...
  • Seite 18 6x30 15x9.5 20mm...
  • Seite 19 M3x14mm...
  • Seite 20 M3.5x12mm M4x18mm M3.5x12mm 16 17 16 17...
  • Seite 21 M4x40mm Pre-drilled M3.5x12mm Dx16 EN (English): After installing the first pre-drilled screw, adjust the gap between the doors first, and then install the remaining two screws. DE (German): Nach dem Einsetzen der ersten vorgebohrten Schraube zuerst den Spalt zwischen den Türen einstellen und dann die beiden verbleibenden Schrauben anbringen.
  • Seite 22 M3.5x12mm max. 60 kg max. 10 kg max. 60 kg...