Shore ROLATV Installationsanleitung Seite 3

3. Connect all power supplies, at this point, the cabinet's
expandable stand will retract.
Laser TV Cabinet Remote Control Pairing Method:
① Ensure the device is powered off.
② Disconnect the power supply to the central cabinet motor and wait for at least 30 seconds.
③ Reconnect the power to initiate pairing mode. (After reconnection, the device will automatically reset—you
will hear an audible "click" from the motor resetting.)
④ Immediately after the sound, press the power button on the remote control repeatedly in quick succession.
4. Before powering on the projector for the first time,
manually extend the stand by 2 cm.
* Once the position memory is set, no further adjustments are needed as it wil
auto-adapt.