Specification; System Requirements - i-tec ADVANCE SERIES Gebrauchsanweisung

i-tec USB 3.0 Metal HUB 3 Port with Gigabit Ethernet Adapter
INTRODUCTION
Thank you for purchasing „i-tec USB 3.0 Metal HUB 3 Port with Gigabit Ethernet Adapter". This is
a product that combines the functions of 3-port USB 3.0 HUB with Gigabit Ethernet adapter.
The HUB offers three USB 3.0 ports with Plug & Play option. The USB 3.0 interface is important
mainly for data transfers from USB 3.0 memory cards and flash disks which will use its high transfer
speed most. HUB is powered from the USB bus and has a built-in surge protection for your
computer in the event of a short circuit on the peripheral devices. The interface is backward
compatible with USB 2.0. You will just connect the HUB by the USB cable to your computer and
immediately you can start using it. It is an ideal companion for everybody who does not have enough
USB ports in his/her notebook, ultrabook or PC and who has to constantly connect and disconnect
his/her favorite USB equipment such as flash disks, mobile phones, tablets, digital cameras, MP3
players, printers, etc.
The Gigabit Ethernet port allows user's computer instantly connect to a 10/100/1000Mbps network.
No need to purchase an extra Gigabit network card and share a PCI or Cardbus slot. With compliance
with USB 3.0 specification, this adapter ensures true 10/100/1000Mbps network speed without any
compromise. Besides, compact and bus-powered design means external power is not required.

SPECIFICATION

3x USB 3.0 port Type-A for connecting USB equipment
Ÿ
1x USB connector Type-A for connecting to a notebook / PC
Ÿ
1x Ethernet 10/100/1000Mb/s LAN RJ-45 port with function MDI/MDIX and self-correction
Ÿ
VIA VL812 chipset compliant with USB 3.0 specification, revision 1.0
Ÿ
Realtek RTL8153 USB 3.0 to Gigabit Ethernet Adapter chipset – supports standard IEEE
Ÿ
802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3az (Energy Efficient Ethernet)
Interface USB 3.0, backward compatible with USB 2.0
Ÿ
LED indication for charging status and Ethernet connection
Ÿ
Supports Wake-on-LAN
Ÿ
Operation temperature: 0-40°C
Ÿ
Storage temperature: -10 to +80°C
Ÿ
Humidity: up to 85%
Ÿ
Dimensions: 110 x 35 x 23 mm
Ÿ
Weight: 73 g
Ÿ

SYSTEM REQUIREMENTS

Hardware requirements: notebook / PC with free USB 3.0 / 2.0 port. If you connect to USB 2.0
Ÿ
transfer speed and some function can be limited. CPU Processor Intel Pentium 1.2GHz and
higher, 512MB RAM.
Operation System: Windows XP SP3 / Vista / 7 / 8 / 8.1/ 10 32/64 bit, Mac OS X, Linux, Android
Ÿ
PACKAGE
i-tec USB 3.0 Metal HUB 3 Port with Gigabit Ethernet Adapter
Ÿ
with built-in cable (20 cm)
CD (Driver and User's manual)
Ÿ
Quick Installation Guide
Ÿ
EN
05