Renkforce RF-USBCH-220 Bedienungsanleitung Seite 2

Operating Instructions
4-Port USB-C Hub with 100 W PD port
®
Item No. 3436123
1 Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operat-
ing instructions (or new/current versions if available). Follow the instructions on the web page.
2 Intended use
This product is a USB-C hub with 4x USB-C
®
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided
under all circumstances.
If you use the product for purposes other than those described, the product may be damaged. Improper use
can result in short circuits, fires, or other hazards.s
The product complies with the statutory national and European requirements. For safety and approval pur-
poses, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third
parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
USB4 , USB Type-C and USB-C are registered trademarks of USB Implementers Forum.
® ® ®
3 Delivery content
Product
4 Description of symbols
The following symbols are on the product or are used in the text:
The symbol warns of hazards that can lead to personal injury.
This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
5 Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
5.1 General information
The product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. This may become dangerous playing material
for children.
If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
Maintenance, modifications and repairs must only be completed by a technician or an authorised repair
centre.
5.2 Handling
Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the
product.
5.3 Operating environment
Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, steam and solvents.
Protect the product from high humidity and moisture.
Protect the product from direct sunlight.
5.4 Operation
Consult an expert when in doubt about the operation, safety or connection of the product.
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
Also observe the safety and operating instructions of any other devices which are connected to the
product.
ports and 1x USB-C PD charge port (100 W).
® ®
Operating instructions
6 Product overview
1
4 3 2
1 USB-C plug
®
2 USB-C port (4x)
®
Notes:
– No driver installation is required.
– The LED indicator (3) visually confirms the active power supply.
– Connect a USB-C PD power source to the USB-C
®
connected to the USB-C plug (1).
®
7 Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage
the housing and can cause the product to malfunction.
– Do not immerse the product in water.
1. Disconnect the product from the power supply.
2. Clean the product with a dry, fibre-free cloth.
8 Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market.
This symbol indicates that this device should not be disposed of as unsorted municipal waste
at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separate-
ly from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by
the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner,
must be removed by end users from the WEEE in a non-destructive manner before it is handed
over to a collection point.
Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste.
Conrad provides the following return options free of charge (more details on our website):
in our Conrad offices
at the Conrad collection points
at the collection points of public waste management authorities or the collection points set up by manu-
facturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries
outside of Germany.
9 Technical data
9.1 Power supply
Input.............................................. 5 V/DC min. 800 mA
Charging input port ....................... 1x USB-C
Interface ........................................ USB-C
Max. transmission speed .............. 4x USB-C
Supported OS (or above) ............. Windows
9.2 Environment
Operating/Storage conditions ....... 0 to +40 ºC, 20 – 80 % RH (non-condensing)
9.3 Other
Dimensions (W x H x D) ............... 93 x 31 x 11 mm
Cable length ................................. 11 cm
Weight .......................................... 36.7 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2025 by Conrad Electronic SE.
3 LED indicator
4 USB-C PD charge port (100 W)
®
PD charge port (4) to charge/power devices
®
PD max. 100 W
®
to USB 3.2 Gen 2
®
max. 10 Gbps (shared among all ports)
®
8 and above, macOS 12.1
®
*3436123_v1_0825_02_PING_mh_en