ROBENS ASSYNT UL Bedienungsanleitung

ASSYNT FLASHLIGHT UL
MODEL: 690385 / S12
6.
7+8.
1.
UK: INSTRUCTION MANUAL UK: INSTRUCTION MANUAL
Read this manual before using the product.
Keep the manual for future reference.
Content
1. Power button
2. Flashlight
3. Cap-clip slot
4. Side light / lantern
5. Magnet
6. Hanging loop
7. USB-C input
8. USB-C port cover
9. Cap-clip
1. INSTALLATION & USE
OPERATION
This product can be used as a:
• Handheld flashlight
• As a headlamp using the included cap-clip (3).
• As a lantern using the side light (4), either hanging from a point
with the hanging loop (6) or standing on a surface.
• Using the magnets (5) at the base to attach to a metal surface.
Important information:
• This product is designed for Class III operation.
• The product does not include a power supply or USB-C cable.
• Charge only using a certified USB power supply.
• Do not attempt to charge using an uncertified
or damaged power supply.
• The USB-C input (7) is located under the USB-C port cover (8).
• Fully charge before first use.
• Rated dust-tight and water-resistant to IP66.
• Drop resistant up to 1.5 meters.
• Do not stare directly into the light source.
• Do not disassemble or modify the product.
Light modes:
• Press and hold the power button • 400-lumen Ultra Boost flashlight
(turns off when released).
• Double-press power button • flashlight ON.
Press repeatedly to cycle through:
- Energy Saver
- Low
- Medium
- High
- Ultra
2.
5.
3.
9.
• Triple-press power button • side light ON.
Press repeatedly to cycle through:
- White
- White Strobe
- Green
• Press and hold power button to turn OFF.
2. CLEANING & MAINTENANCE
The product can be cleaned with water and a damp rag.
Do not use corrosive liquids to clean the lamp as this might damage the
product.
3. LIGHT SOURCE: LED
Light source and control gear is not replaceable.
This would introduce weak points in the construction,
that could reduce the lifetime of the product.
4. DISASSEMBLY & DISPOSAL
Collect separately.
If the product is no longer functional, disconnect the product
from any power source before starting the disassembly process.
To ensure the environment and human health do not dispose the product
as unsorted municipal waste but collect separately.
Dispose batteries, electronic parts and all other components according to
local regulations.
Use the return and collection systems available, irrespective of the
producers or other operators which have set them up.
Contribute to re-use, recycling and other forms of recovery of the product.
5. TECHNICAL DATA
5.0V , 5.0W
Input: 5.0V , 1.0A
Battery: 3.7V , 350mAh
Degree of protection: IP66 dust-tight and water-resistant
Class 3 appliance
1.
4.
5.