kehan 8027C Benutzerhandbuch

USER MANUAL
EN
INSTRUCTIONS
1.To ensure this light is under an optimal condition,please read this manual
Carefully before operation.
2.①. Press the switch button to turn the light on or off.
②. Short press the brightness adjustment button to choose the right brightness: 5 levels of
brightness,long press the brightness adjustment button can be stepless dimming.
③. Press the colour temperature adjustment button to select the appropriate colour
temperature:3 colour temperatures to choose from, cool white & eye-protective warm light
mode(24 LEDs), cool white mode (12 LEDs), eye-protective warm light mode (12 LEDs).
Note: Brightness and colour temperature can only be adjusted when the light is switched on.
Memory function: When the light is turned on, it will maintain the same brightness and colour
temperature as before it was last turned off.
3.After being fully charged, the minimum brightness can work continuously
for 80 hours, and the maximum brightness can work continuously for 8 hours.
BATTERY STATUS
Four lights is on when the battery is fully charged; When only one light is on, it needs to be charged
CAUTIONS
·Immediately recharge the light when it becomes dim.
·Charge the light for at least 2 hours before the first use.
·It takes 3 hours for this reading light to be fully charged.
·If it is not used for a long time,please charge it at least once a month to
Prevent battery aging.
PACKAGE CONTENT