Herunterladen Diese Seite drucken

Werbung

Montageanleitung / Manual
Steady 700 > JR FORZA 700

Werbung

loading

Inhaltszusammenfassung für Heli-Center JR FORZA 700

  • Seite 1 Montageanleitung / Manual Steady 700 > JR FORZA 700...
  • Seite 2 Rump efes gung oben / upper fuselage moun ng 30mm Rump efes gungsbolzen / Bolt Rump efes gung oben / upper fuselage moun ng Gummi tülle / Grommet Rump efes gung oben / upper fuselage moun ng ©Heli-Center-Berlin Seite 1...
  • Seite 3: Mechanik Vorbereitung / Prepare Mechanic

    1. Mechanik Vorbereitung / Prepare Mechanic Mechanik gemäß Bild vorbereiten. Seitenleitwerk und Stützstreben entfernen. Heckrotorgehäuse demontieren. Haube und Haubenbolzen entfernen. Prepare Mechanic how you can see in the picture. ©Heli-Center-Berlin Seite 2...
  • Seite 4 Mount the Carbonplade with Screw 3x8 at the front landingskid position. Mount front Distanz 15mm with Screw 3x10 and Nut M3 at the Carbonplade. Mount the rear Distanz 18mm with Screw 3x8 to the rear landingskid position. Rumpfbefestigungsbolzen 30mm anstelle der Originalen Haubenbefestigungsbolzen montieren. Mount 30mm distance at the position where the original Canopy Bolts was. ©Heli-Center-Berlin Seite 3...
  • Seite 5 Cut the Tail rod guide´s how showed in the picture. Glue the Carbon Tail Rod into the Rod End´s with 5min Epoxy. Führungen und Carbon-Stab gemäß Bild montieren. Obere Leitwerksbefestigung vom Heckrotorgehäuse entfernen. Cut the upper Tailfin holder. Mount Tail rod guide´s and Tail rod. ©Heli-Center-Berlin Seite 4...
  • Seite 6: Mechanik Montieren / Mount Mechanic

    Gummitülle rechts und links am Rumpf montieren. Rumpf und Mechanik mit Linsenkopfschraube M3x16, U-Scheibe 3,2x9 (schwarz) und Distanz 9mm befestigen. Mount the Grommet´s left and rear. Fit the Fuselage at the Mechanic with Screw 3x16,Washer 3,2x9 (black) and Distanz 9mm. ©Heli-Center-Berlin Seite 5...
  • Seite 7 Darauf achten das daß Leitwerk nicht schief verklebt wird ! Glue the Fin with 5min Epoxy. Use the Screw 2,5x8 to fix the middle part of the fin. Please be sure that the Horizontal Fin are glued horizontal ! ©Heli-Center-Berlin Seite 6...
  • Seite 8 Slight irregulations in form, colour or surface are inevitable and will e-Mail: PatrickMagnus@Heli-Center.Berlin.de not be considered as a basis for Web : www.Heli-Center-Berlin.de a n y w a r r a n t y c l a i m s .

Diese Anleitung auch für:

Steady 700