Herunterladen Diese Seite drucken
Vorschau ausblenden Andere Handbücher für SUPERIA S8725-1:
NL
Bedankt voor de aanschaf van
dit product.
Bij eventuele schade of
problemen, vragen wij u onze
website www.solid.eu/sav te
raadplegen en de procedure te
volgen die op onze website
uitgelegd wordt. Als u niet in de
mogelijkheid bent om via het
web de aanvraag te doen,
vragen wij u te begeven naar de
winkel waar u uw constructie
heeft gekocht, samen met de
beschadigde stukken (of met
een foto) en met de Stuklijst,
terug te vinden in het
montageplan, zodat een eerste
controle door de winkel
uitgevoerd kan worden.Vergeet
ook niet de barcode (beginnend
met SOL) mee te nemen of ze
te vermelden op de Stuklijst op
de voorziene plaats. U kan deze
terug vinden op het etiket op de
verpakking van de constructie
ofwel op de leveringsbon. (zie
uitleg hieronder)
Al deze zaken zijn onontbeerlijk
en dus noodzakelijk voor de
behandeling van uw klacht.
S8725-1
S8725-1
F
Nous tenons à vous remercier
pour l'acquisition de ce produit.
En cas de problèmes ou de
dégâts, nous vous invitons à
vous rendre sur le lien internet
suivant www.solid.eu/sav et à
suivre la procédure indiquée sur
la page web. S'il ne vous est pas
possible de vous rendre sur
internet, il vous est demandé de
prendre contact avec le magasin
où vous avez acheté votre
produit, muni des pièces
défectueuses (ou d'une photo)
et la Liste des pièces figurant
dans le plan de montage, afin
qu'un premier contrôle puisse
être effectué par le magasin.
Veuillez transmettre le code
barres (commençant par SOL),
ou le mentionner dans la Liste
des pièces à l'endroit indiqué.
Vous le trouverai sur l'étiquette
de l'emballage de votre produit
ou sur le bon de livraison (voir
explication ci-dessous). Ces
données sont indispensables au
traitement de votre réclamation.
NL
F
GB
D
SOLxxxxxxxxxxx
NL
Leveringsbon
F
Bon de livraison
GB
Delivery note
D
Lieferbeleg
GB
Thank you for acquiring this
product.
In case of problems or damages
please visit our website
www.solid.eu/sav and follow
the instructions. If not possible
to access our webpage by
internet please contact the shop
where the product was bought,
provided with the flawed parts
(or with a picture) and the Bill
of material enclosed in the
assembly plan, so that the shop
can carry out a first control.
Also communicate the following
bar code (beginning with SOL)
or mention it in the Bill of
material in the field provided.
You can locate the bar code on
the label fixed on the packaging
or on the delivery order.
(explained below) information is
needed in order to handle your
claim.
Verpakking
Emballage
Packaging
Verpackung
S8725-1
NL
Sticker
F
Autocollant
GB
Sticker
D
Aufkleber
Dienst na verkoop
Service Après Vente
After Salves Service
Kundendienst
D
Vielen Dank für den Kauf dieses
Produkt.
Bitte wenden Sie sich bei
eventuellen Beschädigungen
oder Problemen an unsere
website www.solid.eu/sav und
folgen sie unseren Website.
Wenn Sie nicht in der möglichkeit
die Anforderung über das
internet zu machen, bitte wenden
Sie sich an den Händler, bei dem
Sie Ihr Produkt gekauft haben,
und nehmen Sie die beschädigten
Teile (oder ein Foto davon) sowie
der Materialliste, das Sie im
Montageplan finden, mit, sodass
ihr Händler das Problem
untersuchen kann.
Bitte denken Sie auch an unten
stehenden Barcode (beginnend
mit SOL). Nehmen Sie diesen
ebenfalls mit oder geben Sie ihn
an der dafür vorgesehenen Stelle
auf dem Materialliste an.
Sie können diese zurück finden
auf das Etiket von der
Verpackung der Konstruktion
oder auf der Lieferschein (sehe
Erklärung unten) Oben genannte
Informationen und Dokumente
sind für die Bearbeitung Ihrer
Beschwerde notwendig.
S8725-1
NL
F
GB
D
loading

Inhaltszusammenfassung für Solid SUPERIA S8725-1

  • Seite 1 Problemen an unsere website www.solid.eu/sav te www.solid.eu/sav and follow raadplegen en de procedure te suivant www.solid.eu/sav et à the instructions. If not possible website www.solid.eu/sav und volgen die op onze website to access our webpage by folgen sie unseren Website.
  • Seite 2 S8725-1 (NL) VOOR AANVANG VAN DE MONTAGE : Bij ontvangst van het pakket dient u de geleverde stukken en hun aantallen te controleren aan de hand van de stuklijst (lijst 'SAV') om u ervan te vergewissen dat u alle stukken ontvangen hebt en dat die zich in goede staat bevinden.
  • Seite 3 Gluing the wood is a technical operation that makes it possi- mogelijk maakt om eventuele ‘gebreken’ en breekpunten van ble to remove any ‘defects’ and breaking points from the solid het massief hout te verwijderen. Ons systeem analyseert en wood. Our system analyzes and scans the inside of the wood...
  • Seite 4 CreateDate: 03.07.2025 Deze technische tekening, montagehandleiding, afgeleide of detail ervan kan beschermd zijn door intellectuele eigendomsrechten en niets daarvan mag zonder schriftelijke toestemming van Solid NV worden gereproduceerd of gebruikt; anders dan het downloaden, SaveDate: 03.07.2025 het bekijken daarvan op een enkele computer en/of printen van een enkele hardcopy ten behoeve van persoonlijk, niet bedrijfsmatig gebruik.
  • Seite 5 Stuklijst / Liste des pièces / Bill of material / Materialliste S8725-1 S8725-1 SOL__________ Ref. Index WP019x123-NTPT-000-1-2980 WP019x123-NDEV-001-1-1008x2900 WP019x123-NDEV-002-1-1019x2900 WP019x123-NGAU-001-1-1019x1334 WP019x123-NGAU-002-1-1019x1334 WP019x123-NDRO-001-1-1019x2300 WP019x123-NDRO-002-1-1019x2300 WP019x123-NDER-001-1-1019x2900 WP019x123-NDER-002-1-1019x2900 WP019x123-NPTP-000-1-0571x3000 Gereedschap (excl.) / Outils (excl.) / Tools (excl.) / Werkzeuge (exkl.) Ladder Cirkelzaag Hamer Schroefboormachine Winkelhaak Klokboor Ø...
  • Seite 6 Stuklijst / Liste des pièces / Bill of material / Materialliste S8725-1 Ref. Index WP019x123-NPTP-000-1-1019x3000 WW040x120-NI53-ANG-1-3000 S5315 S5316 S5317 S5318 S8097C-1 1 x S8097-1 1 x S8097-K-1 + 3 x S6201 S646 WP019x123-NCOB-000-1-0443x2290 WP019x123-NCOH-000-1-0555x2290 S8725-1-Zmt 4.5 x 45 3.5 x 35 #300 S639 S635 M8 x 70...
  • Seite 7 S8725-1 Aanbeveling / Conseil / Recommendation / Empfehlung S6204-A Er is 1 deel met schroefdraad ! There is 1 part with screw thread ! Il y a 1 partie filetée ! Es gibt 1 Teil mit Gewinde! S6204-A S6204-B Er is 1 deel zonder schroefdraad ! S6204-B There is 1 part without thread ! Il y a 1 pièce sans filetage !
  • Seite 8 S8725-1 3.5 x 35 # 24...
  • Seite 9 S8725-1 3.5 x 35 # 12 P1 = 3.5 x 35 # 18...
  • Seite 10 S8725-1 3.5 x 35 # 12 G1 = 3.5 x 35 # 18...
  • Seite 11 S8725-1 E2 = 3.5 x 35 # 18 3.5 x 35 # 18...
  • Seite 12 S8725-1 D1 = 3.5 x 35 # 18 3.5 x 35 # 24...
  • Seite 13 S8725-1 3.5 x 35 # 36 3.5 x 35 # 48...
  • Seite 14 S8725-1 J1 = 3.5 x 35 # 48 O = 16 O1 = 8 O2 = 4 O3 = 3...
  • Seite 15 S8725-1 Creëren van de continue ondersteuning in overeenstemming met DTU 40.41. Een tussenzetscherm is noodzakelijk behalve voor de volgende soorten: Epicéa en Pin Sylvestre. Réalisation du support continu conforme au DTU 40.41. Un écran d'interposition est nécessaire sauf pour les essences suivantes: Epicéa et Pin Sylvestre Creation of the continuous support in accordance with DTU 40.41.
  • Seite 16 S8725-1 Niet van toepassing. Non applicable. Inapplicable. Gilt nicht. Schroef Ø4.9x35 Vis de fixation Ø4.9x35 Screw Ø4.9x35 Schrauben Ø4.9x35 Niet van toepassing. Non applicable. Inapplicable. Gilt nicht. · de bovenkant van de randplank mag niet meer dan 10 mm uit het vlak van het dak steken om een correcte uitvoering van de rand te verzekeren.
  • Seite 17 S8725-1 Tuile R®-producten hebben de bijzonderheid dat ze zowel in de lengte als in de breedte overlappen. Geen snijden Les produits Tuile R®ont la particularité d'être chevauchables, aussi bien sur la longueur que sur la largeur. Pas de découpe Tuile R® products have the particularity of being overlappable, both lengthwise and widthwise. No cutting Tuile R®...
  • Seite 18 S8725-1 Tuile R®-producten hebben de bijzonderheid dat ze zowel in de lengte als in de breedte overlappen. Geen snijden Les produits Tuile R®ont la particularité d'être chevauchables, aussi bien sur la longueur que sur la largeur. Pas de découpe Tuile R® products have the particularity of being overlappable, both lengthwise and widthwise. No cutting Tuile R®...
  • Seite 19 S8725-1 1 bevestiging op elke randtegel 1 fixation sur chaque tuile en rive 1 fixing on each edge tileforme 1 Befestigung an jeder Randplatte 2 bevestigingen per tegel, elke 2 tegels onderaan de helling 2 fixations par tuile, toutes les 2 tuiles en bas de pente 2 fixings per tile, every 2 tiles at the bottom of the slope 2 Befestigungen pro Fliese, alle 2 Fliese unten am Gefälle 6 bevestigingen per plaat in het gemeenschappelijke deel...
  • Seite 20 S8725-1 Verdeel de nokken over de gehele lengte van uw dak. Ze overlappen elkaar, je hoeft ze niet af te knippen. Répartissez les faîtières sur toute la longueur de votre toiture. Elles se recouvrent entres elles, inutile de les couper. Distribute the ridges over the entire length of your roof.
  • Seite 21 S8725-1 Q1 =...
  • Seite 22 S8725-1...