NEEWER RP18H Bedienungsanleitung

NEEWER@
Product Overview
TheNeewerRP18H ring light is designedwith tactile buttonsand is
suppliedwith a 2.4Gwirelessremotecontrol to easilyadjust the light
settings.The light's design is unique, allowing for three phone holders
to be mounted at the sametime, making it ideal for livevideo streaming
on multiple social media platforms.
Package Contents
Reverse FoldingTripod Xl
2.4G remote control
Ringlight Xl
Power cord Xl
Bluetooth remote Xl
Mobile phone
Power adapter Xl
holder X 3
Installation Instructions
2. Install the phone holder
(j) Installthe mobile phone holder @ nstall the mobile phone on the
bysliding into the ring light cold phone holder, and use the USB
shoe mount and tighten the cable to chargethe mobile phone.
lockingring to secure.
User instructions
1. Power up the ring light
Insert one end of the
adapter into the power
jack of the ring light.
Plugthe other end into
a power outlet.
Remote control instructions
3. Usingthe remotecontrol to control a singlering light
Setthe ring light and the remotecontrol to the samechannel (for example,
set both to channel "1 so that the remote control can control the ring light.
O
CH.
4. Usingthe remoteto control multiple ring lights
Setthe ring light unit channel to anynumberfrom 0-9. Setthe remote
control channel to "88". This allows the user to control multiple ring lights
at the same time.
O
CH.
CH.88
CH.
RP18H Ring Light
Instruction Manual
Product illustration
1. Ringlight
(j) Brightness" 9 Cold shoe mount @ Softlight panel
@ Brightness"+" @Colortemperature/Channel ' LISB socket
@ Power button d) Color temperature/Channel"+"
Power socket
@ Displayscreen @CCT/CH switch
01
User instructions
2. Quickstart Guide
power on/ off
Long pressthe " (5" button for 1
secondto turn the ring light on/off.
Reduce brightness
Shortpress • " to decrease t he
brightnessby 1%,Long press"
to decrease the brightness by 10%.
The minimum brightnesssetting is 0%.
• Increase brightness
Short press to increase the
brightnessby Long press"
to increase the brightness by 10%.
The brightnesslevelis adjustable
up to 100%.
• Reduce the color temperature
Long pressthe "CH/CCT"button for 1
second whichwill displaythe color
temperature value on the screen. Press
S
the " " button to decrease the color
temperature value in increments of
100k. The minimum color temperature
is 3200K.
03
Remote control instructions
5. Usingthe remotecontrol to control multiple groups of ring lights
(j) Setthe first groupof ring lightsto the samechannel (for example:
channel "1"), and the second group of ring lights ta the same channel
(for example: channel "2"), and so forth in the case of further groups.
@When the remotecontrol channelis set to the first group of ring
lights can becontrolled. Likewisewhen the remotecontrol channelis
set to the secondgroup of ring lights can becontrolled, and soon.
@ If the remotecontrol channel is setto "88",all ring lights are controlled
together,
O
CH. :
u%
CH.
6. Usingthe remotecontrol to adjust the brightness and color temperature
Turn on the ring light and remotecontrol. Setthe ring light and remote
control on the same channel.
@ Pressthe "+" button on the remote to increasethe colortemperature,
and press the " " button to decrease.
@ Press the " " button on the remote control to increase the
brightness,and pressthe " -b " button to decrease.
05
English
Franqais
Deutsch
taliano
Esparfiol -
Nederlands
Product illustration
EN EN
2. Remote control
Power/standby button
Channel button
Channel/color
temperature "+" button
Channel/color
emperature" " button
Installation Instructions
1. Mount the light Onthe tripod stand
O) Loosenthe fixing knob
counterclockwise
the threelegs of tripod.
User instructions
EN EN
• Increase the color temperature
Long pressthe "CH/CCT"button for 1
9, second to display the color temperatu re
value on the screen. Press the "+" button
to increase the color temperature value
in increments
color temperature is 5600K.
• Channel setting
Long pressthe "CH/CCT"button for 1
second to displaythe "CH"numberon
the screen. Short press the
button to select
Tip: The channel CH:Oon the light is a backup channel, which only
respondsto the "88" channel setting on the remotecontrol.
3. Bluetooth remote control for mobile phones
O) Turn the remote control on @use the built in cameraapp
and use your mobile phone's function on your phone, and
Bluetooth settings to connect press the remote control button
to take photos.
to "Neewer RT-107"
Remote control instructions
EN
@Longpress the" @ " buttonto enterorexitthestandby mode.
3? 00k
VI
Adjust color temperature Adjust brightness
Safety Notes
1. Please do not dropthe product to preventdamageto the light or its
componentswhich could resultfrom a strong impact.
2. Pleaserefrainfrom looking directly into the light which may resultin
eyesightdamage.
Please do not placethe product in an environmentcontaining flammable
or volatile substances.
4 Please do not usethe product inthe rain ora humid environment.
. Turn off at the power source when not in use.
6.Whennot in use,pleasekeepthe product in awell-ventilated,dry place
awayfrom heat sourcesand magneticfields.
7.Waitfor the product to cool down beforeputting it in a carry caseto prevent
any residualheat from causingdamageto the LEDs
Copyright
0 2022 Shenzhen Neewer Technology Co., Ltd. All Rights Reserved.
This document is the sole property of Shenzhen Neewer Technology
Co., Ltd and shall not be, reproduced, transmitted, transcribed, stored
in a retrieval system or translated in any form, by any means, without
prior written permission from Shenzhen Neewer Technology Co., Ltd.
Shenzhen Neewer Technology Co., Ltd reservesthe right to change
content in this instruction manual at any time and without prior notice.
01
07
Version Control
13
Version number
19 Date
25
02/17/2022 1.0
31
37
43
Installation Instructions
Displayscreen
Brightness"+"button
@ Setthe tripod legsto the
required position and tighten
Brightness " " button
the knob clockwise to secure.
@ Mount the ring light baseon
and unfold
the tripod stand and tighten
the knob clockwise to secure.
02
Basic functions of the
1. Basic functions of the remote
(j) Slide the battery coverdownwardsto remove. Insert two AAA
batteriesinto the battery compartment respectingthe positiveand
negativepolarities. Replacethe cover.
@Short-press the"@"button to turn theremote control o n/off
of 100K The maximum
or
a channel from "0-10."
2. Adjust the remote control channel
(j) Turn on the remote control.
@Short pressthe remotecontrol "M" key.
The channel number will flash on the
remote control's display.
@Short.pressthe and "
- buttons
the remote control to adjust the channels
(1-10 and 88). There are 11 channels in total.
After selecting,pressthe "M" button to confirm.
04
Product Specifications
Product model
Product size
Number of LEDs
Inputvoltage
Maximum power
Maxi mum illumination
Color rendering index
Brightness adjustment range
Color temperature
adjustment range
Available channels
Remote control power
06
Issued by
Description
RP18H Ring
Light Manual
@ Extendthe bar,adjust to
required height and tighten
the knob clockwise to secure.
9 After adjustingthe tilt angleof
the ring light, tighten the fixing
knob clockwise to secure.
remote control
control
o
on
RP18H
480x480x52mm
512PCS
DC 15V
42W
CRI 97+
3200K-5600K
0-10 channels
2 "AAA' batteries