Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SPECIFICA
SPECIFIC
SPECIFIC
SPECIFIC
SPECIFICATIONS
It is advisable not to separate the storage
water heater from the mains except during
fairly long absences. Due to the high-qual-
ity thermal insulation made of CFC-free
polyurethane rigid foam, the heat loss is
insignificant.
GB
Fig. 5:
Fig. 5:
Fig. 5:
Fig. 5: Control panel for the model WSE 15 Slim (left)
Fig. 5:
and the models WSE 30 Slim ... WSE 100 Slim (right)
T T T T T echnical Data
ec ec ec ec hnical Dat
hnical Dat a a a a
hnical Dat
hnical Dat
Model
Capacity (l)
Nom. pressure (MPa)
Weight empty/filled
with water (kg)
Corrosion protection
Power consumption (W)
Supply voltage (V)
Protecting class
Protecting type
Time needed for heating-
up to 75 °C
Mix water capacity
at 40 °C (l)
Stand-by
consumption
1) The time needed for heating-up the filled tank, starting with a cold water temperature of 15 °C
2) The energy consumption for a constant water temperature of 65 °C at an environment temperature
of 20 °C, measured according to DIN 44532
A A A TIONS
TIONS
TIONS
TIONS
WSE 15
Slim
11/26
1)
(min)
2)
(kWh/d)
0,40
When there is danger of frost, the storage
water heater must be emptied by means of
the drain valve at the safety module with
the stop valve being closed.
WSE 30
Slim
15
30
19/49
enamaled tank + magnesium anode
splash water proof
33
65
27
58
0,90
– 10 –
WSE 50
WSE 80
Slim
Slim
50
80
0,6
24/74
31/111
2000
230
I
115
185
94
148
0,99
1,26
WSE 100
Slim
100
36/136
235
194
1,71
Werbung
