Timberkits Caterpillar Bedienungsanleitung
Verwandte Anleitungen für Timberkits Caterpillar
Inhaltszusammenfassung für Timberkits Caterpillar
- Seite 1 C a t e r p i l l a r...
- Seite 2 (IT) Leggere tutte le istruzioni e guardare i diagrammi (DE) Lesen sie alle anweisungen und betrachten sie die schaubilder see this symbol. www.timberkits.com (UK) Check assembly before gluing (FR) Vérifier le montage avant collage (ESP) Controlar el montaje antes de empezar a pegar (IT) Controllare l’assemblaggio prima di incollare...
- Seite 3 Or visit our website for tips, advice and instructional videos. All these can be found in Resources/Advice Videos on our website.
- Seite 5 6mmx25mm 3mmx67mm x10...
- Seite 6 6mmx25mm 6mmx165mm 30MM 30MM 38MM 38MM 20mins...
- Seite 7 5 x10...
- Seite 8 Push all of the cams part 5 to one end. Use a cocktail stick to apply glue to the main shaft near to the handle end (use a glue guard for the first one). Move the cam in place over the glue and directly above the first 3mm diameter hole in part 4.
- Seite 9 20mins...
- Seite 10 Part #7 must be glued centrally on part #6 so that it is directly beneath the main shaft. 20mins...
- Seite 11 3mmx67mm Take one of the nine part 8s with the pegs glued in and glue on two part 9’s as shown. Round off with sandpaper and wax one end of all of the 3mm x 67mm pegs. Glue nine of the 3mm x 67mm pegs into the nine part #8’s provided.
- Seite 12 3mmx180mm Apply wax to the edges of the cams (parts #5)
- Seite 13 Position the upright bamboo piece (size 3mm x 180mm) into the block (part #7) so the drum (part #12) rests on spacer (part #2). The bamboo should not quite reach the bottom of part #7. Glue part #12 in this position. Position part #13 to a good balance point along the bamboo and glue in place before positioning on to horizontal bamboo.
- Seite 14 If when you turn the handle it jams try lifting the caterpillar body segments up one by one whilst trying to turn the handle until you can identify which segment is catching on the cam below. Then lift it out and round and wax the...
- Seite 15 Notes...
- Seite 17 (UK) If you enjoyed building this model why not try our others. Available directly from Timberkits Ltd or from our UK, European or worldwide retail partners. Check our website to find your nearest stockist. (FR) Si vous avez apprecie construire ce modele, pourquoi ne pas en essayer d’autres. Ils sont disponibles chez Timberkits Ltd ou chez nos partenaires detaillants au Royaume Uni, en Europe et plus largement dans le monde.
- Seite 18 Timberkits Limited Old Village Hall Llanbrynmair Powys, SY19 7AA 00 (44) (0) 1650 521635 timber_kits@btconnect.com www.timberkits.com Timberkits logo and all Timberkits designs are Copyright (©) 2014 all rights reserved.