montech AIRCOOLER 210 Bedienungsanleitung
Quicklinks
Inhaltszusammenfassung für montech AIRCOOLER 210
- Seite 1 Vitz food Vane/ MONTECH MONTEC CPUCOOLER AIR COOLE...
-
Seite 2: Spezifikation
SPECIFICATION Model AIRCOOLER Size 152.7 130 x 98.5 (mm) Operating 10.8N13.2V Speed Voltage Range 600-1500 ± R.P.M 27dB(A) Lifetime 60,000/hrs Noise Max. Airflow 73CFM(ft3/min) Connector 4Pin PWM/3Pin ARGB Bearing Copper Heat Pipes Rated Voltage DC 12V Fin Material Aluminum*39 Model AIRCOOLER 152.7 98.5 (mm) - Seite 3 Cooler Fan Clips Spacer nuts(Shared) Cooler Screwdriver Thermal Grease Controller mounting bridge Socket 11 (V3)/2066...
- Seite 4 •socket 11 200/1366 FRONT Screw Pillar Spacer Nut Thumb Screw Clamp Backplate Mounting Bracket •socket 2011 (V3)/2066 2011 Dual Head Pillar Thumb Screw Mounting Bracket Screw Pillar Spacer Nut AMD Mounting Bracket...
- Seite 5 •socket 115X/1366 iii- 4pin P 3pin ARGB Pass Screw Pillars through Backplate. Fit with Clamps. Assemble the Spacer Nuts, Mounting Bracket and Thumb Screws. SATA+3pin Remove Protective Film and apply Thermal Paste on CPU Place the Cooler and align Spring Screws to the Mounting BracketTighten Spring Screws, alternate every 3 rotations.
- Seite 6 12011(V3)/2066 4pin P 3pin ARGB SATA+3pin 2011 (V3)/2066 Install Dual Head Pillars to ILM Stud. Place Mounting Bracket and Thumb Screws Remove Protective Film and apply Thermal Paste on CPU Place the Cooler and align Spring Screws to the Mounting Bracket. Tighten Spring Screws, alternate every 3 rotations Use Fan Clips to attach the Fan.
- Seite 7 liiiiiä 4pin PWM 3pin ARGB Remove AMD Mounting Bracket. Assemble the Spacer Nuts, Mounting Bracket and AMD Screw Pillars. Remove Protective Film and apply Thermal Paste on CPU SATA+3pin Place the Cooler and align Spring Screws to the Mounting Bracket. Tighten Spring Screws, alternate every 3 rotations.